http://Complaints-india.com

http://Complaints-india.com

Complaints India enables consumers and users of services and products to post their common complaints and suggestions regarding airline, bank, business, companies and Government and non Government organizations in India and abroad.

Track your car complaints, mobile phone complaints, bank complaints, credit card complaints etc. at this website.

It's a consumer forum, board or bureau for consumers to redress their complaints.

Consumer Courts in India now gives the power to consumers to fight for their consumer rights at district level consumer forums.

However consumers can proceed to confront companies and try to get quicker responses through the website.

For companies its important to quickly address consumer complaints to protect their product or service brand image.

Consumer-India web site has a number of resources for your assistance.

Separate new product complaint and NRI complaint sections help in easier posting and tracking of complaints.

With online internet scams proliferating, its easy to get cheated by fraud companies.

Consumers need to protect themselves from online scams, email scams, phishing etc.

Complaints can be posted on all products and services.

You can post complaints

Mobile Services (Airtel, BSNL, Idea, Reliance, Docomo, Uninor, Aircel etc.)

Mobile Phones (Nokia, LG, Samsung, Sony Ericsson, Blackberry, Micromax, Karbonn etc.)

Home Appliances like TVs, Refrigerators, ACs, Cooking Ovens etc.

Select appropriate sub category from the drop down field in Consumer Complaint Submit Page and submit details Complaint.

Bank Complaints India

Mobile Complaints India

Resolved Complaints India

Answered Complaints

Breaking News

Fraud Companies

All Companies

If Company Mail Id is given, complaint will be forwarded to Company for resolution.

You can also search for any complaint status.

Major Companies / Services Items Covered:

Banks:

Abn Amro Bank Allahabad Bank American Express Bank Andhra Bank Axis Bank Bank Of India Canara Bank Central Bank Of India Citibank Corporation Bank DENA Bank HDFC Bank HSBC Bank ICICI Bank Indian Overseas Bank Oriental Bank Of Commerce Punjab National Bank State Bank Of India (SBI) Standard Chartered Bank IDBI Bank United Bank Of India YES Bank etc.

Mobile Services:

Airtel Aircel BSNL MTNL Idea Tata Indicom Tata Docomo Reliance Uninor Loop Systema etc.

Top Travel Agents:


Clear Trip Make My Trip Yatra Travelocity Ixigo Travelguru Cox & Kings Thomas Cook Raj Travels Kuoni Travels etc.

Mobile Phone Handsets:

LG Nokia Samsung Motorola Sony Ericsson Blackberry Iphone Micromax Karbonn Chinese Phones Videocon HTC Virgin Lava Spice Intex Imate BenQ etc.

Car Companies:

Maruti Tata GM Hyundai Mahindra HM Mitsubishi Honda Reva Toyota Skoda Peugeot Nissan Volkswagen Fiat Audi BMW Mercedes Opel etc.

Top Car Models:

Audi A6 Honda City Fiat Grande Punto Mahindra Scorpio Ford Endeavour Bentley Azure Mitsubishi Pajero Mercedes Benz C-Class Chevrolet Optra Hyundai Santro Tata Nano Indica Skoda Laura Toyota Corolla Porsche Boxster BMW 530i Maruti Swift

-->Recent Searches:

Builder Complaints,

Passport Complaints,

ICICI Complaints,

HDFC Complaints,

Insurance Complaints,

Vodaphone Complaints,

Airtel Complaints,

Reliance Complaints,

Bajaj Life Complaints,


Airtel India Complaints,

City Limouzine Complaints,

Credit Card Complaints,

Bank Complaints,

Indian Bank Complaints,

BSNL Complaints,

Hospital Complaints,

Share Complaints,

Stock Exchange Complaints,

India Complaints,

Computer Complaints,

HP Complaints,

Builder India Complaints,

Fraud Company Complaints,

Cheating Case Complaints,

Real Estate Complaints,

Trading Complaints,

Postal Complaints,

Airline Complaints,

Train Complaints,

College Complaints,

Medical Complaints,

Gas Agency Complaints,

Salary Complaints,

Online Scam Complaints,

India Hotel Complaints,

Insurance Complaints

-->

Post Your Resumes Free

at:

http://www.resumes-india.com

-->

http://Complaints-india.com

Airline Complaints

Air India Complaints

Air Ticket Agent Complaints

Go Air Complaints

Indian Airlines Complaints

Indigo Complaints

International Airlines

Jet Air Complaints

Kingfisher Complaints

Paramount Complaints

Spice Jet Complaints

Other Airline Complaints

Airport Complaints


Eastern India Airports

Foreign Airport Complaints

Northern India Airports

Southern India Airports

Western India Airports

Apparel & Accessories

Apparel Complaints

Bags -Leather Complaints

Shoes Complaints

Watches Complaints

Other Accessories Complaints

Automobile Complaints


Automobile Agency Complaints

Car & SUV Complaints

CAR Complaints

Car Dealer Complaints

Car Service Complaints

Driving School Complaints

Moped & Scooter Complaints

Motor Cycle Complaints

Other Automobile Complaints

Bank Complaints


Foreign Bank Complaints

Govt. Bank Compalints

Private Bank Complaints

Other Bank Complaints

Books & Stationary Complaints


Books & Magazine Complaints

News Paper Complaints

Stationary Related Compalints

Builders&Real Estate Complaints


Builder Complaints

Land Developer Complaints

Real Estate Agency Complaints

Other Real Estate Complaints

Business Services Complaints


Bill Pay Services Complaints

Consulting Services Complaints

Courier Complaints

Recruitment Complaints

Tax Services Complaints

Other Business Complaints

Computers & Office Accessories


Computer Laptop Complaints

Copier Fax Complaints

Hardware Complaints

Printer Scanner Complaints

Software Complaints

Consumer Complaints India


Bad Experience

Consumer Complaints

Online Consumer Complaints

Education Complaints


College Complaints

Online Education Complaints

School Complaints

Training Institute Complaints

Universities & Boards Complaints

Electronics Cameras& Mobile Phones

Camera Complaints

Mobile Phone Complaints

Music-Video Player Complaints

Phone Complaints

Video Camera Complaints

Other Digital Devices

Entertainment - Fitness & Sports

Aerobic

Amusement Park Complaints

Cable TV DTH Complaints

Cinema Complaints

Club & Library Complaints

Event Management Complaints

Health Club Complaints

Movie Rental Complaints

Sports Clubs & Gym Compalints

Sports Complaints

Yoga Complaints

Finance -Share Complaints


CA - Tax Advisor Complaints

Chit Fund Complaints

Credit Card Complaints

Insurance Complaints

Investment Schemes

Loan - FD Complaints

Mutual Fund Complaints

Online Trading Complaints

Share - Demat Complaints

Stock Advisors-Brokers

Stock Market BSE NSE Complaints

Food & Beverages Complaints


All Beverages Complaints

Food Product Complaints

Shop Complaints

Fraud Complaints


Bank Fraud

Company Fraud

Credit Card Fraud

Investment Fraud

Online Fraud

SMS Fraud

Other Fraud

Government Dept Complaints

Cutoms & Excise Complaints

IT- PF -Pension Complaints

Land Registration Complaints

Marriage-Birth-Death Related

Municipality & Local Govt Complaints

Passport Visa Complaints

Police Complaints

Postal Complaints

Power &Water Complaints

Traffic Complaints

Other Govt Service Complaints

Health & Beauty Services


Ayurveda & Natural Treatment Complaints

Beauty & Skin Treatment Complaints

Cosmetic Product Complaints

Cosmetic Treatment Complaints

Dental Treatment Complaints

Homeopathy Complaints

Weight-Hair Loss Complaints

Other Treatment Complaints

Home Care Services


Garden & Pest Control

Gas Agency Complaints

Milk / News Paper Supply Complaints

Packing & Transport Complaints

Painting & Plumbing Complaints

Power & Water Complaints

Repair & Maintenance Complaints

Security Agency Complaints

Home Equipment & Accessories


AC/Fridge/Geyser Compalints

Cooker/Oven/Mixie Complaints

Interior & Furnishing Complaints

TV Complaints

Washing Machine Complaints

Other Appliances Complaints

Medical Complaints


Clinic Complaints

Doctor Complaints

Hospital Complaints

Other Medical Service Complaints

NRI Complaints


Accomodation Complaints

Consulate Complaints

Discrimination Complaints

Education Complaints

Emigration Complaints

Investment Complaints

Passport / Visa Complaints

Travel Complaints

Workplace Complaints

Other NRI Complaints

Office Complaints

Boss & Co-worker Complaints

Office Harassment

PF - Gratuity Complaints

Salary Complaints

Other Office Complaints

Online Scam Complaints


Click / Survey Scams

Email Scams & Spam Mails

Get Rich Websites

Lottery Scams

Phishing Scams

SMS Scams

Work Online Scams

Others

Other Complaints

Restaurants & Hotel Complaints


Fast Food Complaints

Hotel Complaints

Pubs & Bars Complaints

Restaurant Complaints

Shopping Complaints


Dealer Complaints

Local Shop Complaints

Shopping Mall Complaints

Super Market Complaints

Society Issues


Dirt & Garbage Complaints

Drinking/Smoking Complaints

Harassment Complaints

Neighbour Complaints

Noise Complaints

Pets & Animal Complaints

Pollution Complaints

Public Nuisance Complaints

Other Social Complaints

Telecom Service Complaints


Aircel / Unior Complaints

Airtel / Reliance Complaints

BSNL / MTNL Complaints

Idea / Docomo Complaints

Internet/Broadband Service Complaints

MTS Complaints

Tata / Vodaphone Complaints

Other Telecom Service Provider Complaints

Travel/Tour/Stay Complaints


Cruises / Resort Complaints

Foreign Travel Complaints

Hotel Complaints

India Travel Complaints

Taxi Complaints

Time Share Complaints

Train/Transport Complaints

Other Travel Complaints

TV Programs & Channel Complaints


Cable TV Complaints

Entertainment Channel Complaints

News Channel Complaints

Regional Channel Complaints

Satellite TV Complaints

TV Program Complaints

Other TV Complaints

Website Complaints


Dating&Marriage Sites

Gmail/Yahoo Other Email Complaints

Online Payment Complaints

Online Shopping Complaints

Scam Website Complaints

Social Networking Complaints

Other Website Complaints

News:

Three airline passengers, including two Iranians, were arrested for traveling with fake passports

Fake currency notes seized,two Vindhyachal Prasad Chauhan and Hari Prasad Mishra, held PATNA

CBI arrests Hinish Ramchandani,partner of SRS Investment Company Kanpur. owner for over Rs 45 crore bank fraud

Twelve Board employees issued show-cause notice in exam scam,Himachal Pradesh

Scan scam threatenslives,CHANDIGARH

Tribal land up for grabs in Godhra, district officials sniff a scam,Vadodara

Gang of 9 held for R40 lakh online lottery fraud,Mumbai

staff held for fraud, arrested two railway employees from Chanakyapuri area of the city

Gangs behind credit card fraud held CHENNAI

Over 535litre rectified spirit seized;2held with fake holograms,ALLAHABAD

Gulam Ali Man arrested with 5kgfake gold in Vadodara

I-T dept,banks fight,Rs 2200cr recovered from Mehta scam gets stuck

HC raps state for failing to probe Rs 90 cr scam

Mr V Pattabhiraman bank manager sentenced to four years in jail in fraud case, Central Bank of India Royapettah Branch in Chennai

Anurag Kashyap upset with fake accounts by his name on Twitter and Facebook

Vijay Mallyawebsite hacker yet to be traced

CBI files chargesheet in multicrore railway recruitment scam

Fake techies held for fraud.47-year-old real-estate agent for cheating banks of several crores of rupees,

Prosecution for sanction for scam accused on order from HC

Leading private company,Nitishree Builders,held for fraud.Noida

Railway Recruitmentscam.Chargesheet filed against 15

CBI to study Nishikant’s bank records,Punjab Engineering College

Match-fixing scam fails to stump bookies Champions League Twenty20,

29 cricketers suspected in alleged fixing in IPL II

Fake currency peddlers now buy SB accounts

Read More News

Top Complaints:

Fake job offer letter MRS SUMAN KHAN - (Executive - HRD)Videocon Electronics India Ltd. (1868)

QUERY ABOUT THE COMPANY . G.C.I Enterprises a Fake? (1860)

www.agcienterprises.com DD for Rs 3450/- for job conformation (1438)

gci enterprises recruitment, uttaranchal, dehradun. Gcienterprises.com (1315)

www.divyainternational.biz Divya International (1303)

Fake Email...Interview Call Sansui Technologies India (1258)

Address of Banking Ombudsman in Cities, Delhi, Mumbai, Bangalore, Chennai, Kolkata, Hyderabad,others (1183)

for transfer in my winning prize (1120)

LTC 80 and LTC Q fares not available anywhere (1103)

Irresponsible Samsung Dealer Bismi electronics, Kerala, Kochi (1011)

Change of address and Redemption of Bonds (985)

Cheating done by Uninor store manager (980)

Cheating (977)

Sachin Charit Manas (972)

www.opalconsultants.com Complaints Opal Consultant Fraud Scam Online Job Offer (969)

Fraud company (950)

Company details (946)

balance inquiry (882)

PARADISE GRAND HOTEL (864)

Airtel online mobile recharge (772)

suchir india developers project delay TIMBERLEAF PROJECT HYDERABAD (756)

BSNL Broadband (750)

refund of my fund 250000GBP (724)

Harassment by the recovery agents (710)

No development & no delivery of plot of land (694)

Maximum Complaints:

phone dead twise in a day - BSNL (61)

Airtel - Disconnecting the service after 6 months for non-submission of documents - Airtel (45)

VIDEOCON” Direct Recruitments offer - Videocon Electronics India Ltd (43)

Phishing in sb a/c - ICICI BANK (38)

Your Resume has been selected by company HRD. I have attached your Company offer latter. Kindly see - Sansui India Limited (27)

nokia company is responce for my harrasment. Nokia 5233 Mobile Phone Complaint - nokia (25)

Illegal charges on DD - Axis bank (20)

online fraud - Bajaj India Limited (19)

RTI ACT 2005 AGAINST THE BANK - SBI - state bank of india (19)

SMS through Job Alert http://2shared.com/photo/N1yN1yAn/BAJAJ Y.p Singh(seniour Manager-HRD) - Bajaj India Ltd (17)

Incoming de-activated with out any notification even after submitting the documents - Tata Docomo (17)

Recive message your resume shorted. - Bajaj Group Of Companies (16)

RECRUITMENT FRAUD LETTER - Videocon India (15)

Forced activation of services and deduction of balance by Aircel, Hyderabad - Aircel (14)

vidhyasthaan helped me to get uk visa-I recommend - Vidhyasthaan (14)

msn yahoo lottery agency - Foreign Exchange/remittance Department, Rbi (14)

FRAUD COMPANY - Khan Gold Care (14)

fraud recruitment email, spam email - Godrej Electronics Limited Limited (14)

ACCEPTANCE OF FAULTY BILLING BUT NO BUY BACK OF PHONE - Tata Indicom (14)

About to my SIM have not activated after 4 days - Vodafone (13)

Videocon Recruitment Letter - Videocon (12)

100% Geniune company - Microleans, Stallion Microsystem (12)

Made to vacate my berth by Railway Police - indian railways (12)

RE-DEBITING OF AMOUNT FROM ACCOUNTS - HDFC BANK (12)

Fake currency note from PNB ATM - Punjab national bank (11)

Search This Blog

Pages

Popular Posts

Total Pageviews

Friday 20 August 2010

Websites and Links - Useful for all


<
blockquote>Bihar Vidhan Parishad


Bihar Vidhan Sabha

Patna High Court


e-Gazette, Bihar

Departments

Animal & Fisheries


Registration


Home


Environment & Forest


Disaster Management


Human Resource Development


Bihar State Tourism Development Corporation


Finance


Industries


Information & Public Relations


Minority Welfare


Science & Technology


Co-operative


General Administration


More sites ... The following sites can also be visited for further information related to Bihar.



Bihar Legislative Council

Bihar Legislative Assembly

Hon'ble Governor's Secretariat

Chief Minister's Office

Dy. Chief Minister's Office

Agriculture

Animal & Fish Resources

BC & EBC Welfare

Board of Revenue

Building Construction

Commercial Taxes

Co-operative

Disaster Management

Energy

Environment & Forest

Finance

Food & Consumer Protection

General Administration

Health & Family Welfare

Home

Human Resource Development

Industry

Information & Public Relations

Labour Resources

Law

Minority Welfare

Panchayati Raj

Public Health Engineering

Planning

Registration, Excise & Prohibition

Revenue & Land Reforms

Road Construction

Rural Development

Rural Works

Science & Technology

Social Welfare

Sugarcane

Transport

Tourism

Urban Development

Vigilance

Water Resources

Youth, Art & Culture

Bihar Police

Arwal Police Office

Araria Police Office

Bettiah Police Office

Gopalganj Police Office

Motihari Police Office

Purnea Police Office

Supaul Police Office

70th Indian Road Congress

Dr Rajendra Pd Smriti Sangrahalay

E-Counting - ECI, Bihar

E-Gazette, Bihar

Indian Red Cross Society, Bihar

International Buddhist Conclave - 2010

Khuda Baksh Oriental Public Library

Koshi Kshetriya Gramin Bank, Purnea

Kosi Aayog (Enquiry Commission)

Krishi Vigyan Kendra, Jamui

Krishi Vigyan Kendra, Vaishali

Sikariya Panchayat, Jehanabad

Singheshwar Temple, Madhepura

Patna Division, Patna

Tirhut Division, Muzaffarpur
Patna High Court

Darbhanga District Court

Katihar District Court

Kaimur District Court

Samastipur District Court

Sitamarhi District Court

Siwan District Court




Accountant General, Bihar

Bihar Co-Operative Bank, Patna

Bihar Commission for Backward Classes

Bihar Electricity Regulatory Commission

Bihar Foundation

Bihar Industrial Area Development (BIADA)

Bihar Mahadalit Vikas Mission

Bihar Prashasnik Sudhar Mission

Bihar Public Service Commission

Bihar Rajya Pul Nirman Nigam

Bihar Rajya Beej Nigam Ltd

Bihar School Examination Board

Bihar State Aids Control Society

Bihar State Election Authority (BSEA)

Bihar State Electricity Board

Bihar State Housing Board

Bihar State Road Development Corp. Ltd.

Bihar Staff Selection Commission

Bihar State Tourism Development Corp.

Bihar State Women Development Corp.

Bihar Tuberculosis Association, Patna

Bharat Wagon & Engineering Co. Ltd.

BELTRON

Bihar Infrastructure Development Corp.

Central Excise, Bihar

Central Excise - e-Auction, Patna

Central Ground Water Board, Patna
Central Selection Board of Constables

Chief Electoral Officer, Bihar

Controller of Communication Accounts

COMPFED - Sudha, Pride of Bihar

District Health Society, Patna

Directorate of Employment & Training

Directorate of Rice Development

Economics & Statistics Directorate

Flood Management Information System

Food Corporation of India (Bihar)

Ganga Flood Control Commission

Indian Red Cross Society, Patna

Integrated Child Development Services

Land Development Bank

Patna Municipal Corporation

Patna Regional Development Authority

Railway Recruitment Board, Patna

Railway Recruitment Cell, Patna

Railway Recruitment Board, Muzaffarpur

Small Industries Services Institute

State Board of Technical Education

State Election Commission, Bihar

State Health Society, Bihar

State Horticulture Mission, Bihar

State Level Bankers Committee, Bihar

State Govt. Tenders

Uttar Bihar Gramin Bank, Muzaffarpur




Araria
Madhubani

Arwal
Madhepura

Aurangabad
Muzaffarpur

Banka
Munger

Begusarai
Nalanda

Bhagalpur
Nawada

Bhojpur
Patna

Buxar
Purnea

Darbhanga
Rohtas

East Champaran
Saharsa

Gaya
Saran

Gopalganj
Samastipur

Jamui
Sheohar

Jehanabad
Sheikhpura

Kaimur
Sitamarhi

Khagaria
Siwan

Katihar
Supaul

Kishanganj
Vaishali

Lakhisarai
West Champaran




Bihar State Information Commission

Lokayukta, Bihar

Bihar Human Rights Commission




Bihar Public Grievance Redressal System

Chief Secretary Public Grievance Cell




A.N.Sinha Institute of Social Studies

Bhagalpur College of Engineering


Bihar Agricultural Management & Extension Training Institute (BAMETI)


Bihar Institute of Public Administration

Bihar National College, Patna

B.R.Ambedkar Bihar University, Muzaffarpur

Chanakya National Law University, Patna

Chandragupta Institute of Mgmt, Patna

College of Arts & Crafts, Patna University

DNS Regional Institute of Co-op Mgmt

Jai Prakash Vishwavidyalaya, Chapra

K.S. Darbhanga Sanskrit Vishwavidyalaya

Lalit Narayan Mithila University, Darbhanga

L. N. Mishra Institute, Patna

Magadh University, Bodh Gaya

Muzaffarpur Institute of Technology

Nalanda Open University, Patna

National Institute of Technology, Patna

Patna Law College, Patna

Patna University, Patna

Rajendra Agriculture University, Pusa

Sainik School, Nalanda

Science College, Patna University

Veer Kunwar Singh University, Arrah

Jawahar Navodaya Vidyalay, Araria

Jawahar Navodaya Vidyalay, 24 Pargana

Jawahar Navodaya Vidyalay, Banka

Jawahar Navodaya Vidyalay, Bhojpur

Jawahar Navodaya Vidyalay, Buxar

Jawahar Navodaya Vidyalay, Chatra

Jawahar Navodaya Vidyalay, Dumka

Jawahar Navodaya Vidyalay, E Champaran

Jawahar Navodaya Vidyalay, Gaya

Jawahar Navodaya Vidyalay, Giridih

Jawahar Navodaya Vidyalay, Godda

Jawahar Navodaya Vidyalay, Gopalganj

Jawahar Navodaya Vidyalay, Gumla

Jawahar Navodaya Vidyalay, Hooghly

Jawahar Navodaya Vidyalay, Howrah

Jawahar Navodaya Vidyalay, Jamui

Jawahar Navodaya Vidyalay, Kaimur

Jawahar Navodaya Vidyalay, Katihar

Jawahar Navodaya Vidyalay, Khagaria

Jawahar Navodaya Vidyalay, Kishanganj

Jawahar Navodaya Vidyalay, Lakhisarai

Jawahar Navodaya Vidyalay, Madhepura

Jawahar Navodaya Vidyalay, Medinipur

Jawahar Navodaya Vidyalay, Munger

Jawahar Navodaya Vidyalay, Nalanda

Jawahar Navodaya Vidyalay, Nawada

Jawahar Navodaya Vidyalay, Palamau

Jawahar Navodaya Vidyalay, Purnea

Jawahar Navodaya Vidyalay, Saharsa

Jawahar Navodaya Vidyalay, Saharsa

Jawahar Navodaya Vidyalay, Sahebganj

Jawahar Navodaya Vidyalay, Samastipur

Jawahar Navodaya Vidyalay, Sheikhpura

Jawahar Navodaya Vidyalay, Sitamarhi

Jawahar Navodaya Vidyalay, Siwan

Jawahar Navodaya Vidyalay, Supaul

Jawahar Navodaya Vidyalay, Vaishali

Jawahar Navodaya Vidyalay, W Champaran

Navodaya Vidyalay Samiti, Patna

Kendriya Vidyalay, Gopalganj


The links given below will show you the documentation published by individual departments, boards, corporations, etc. with respect to Right to Information Act, 2005. If you interested in learning more about this act and wish to find out which form to use and to whom it should be submitted, please click on this link - General Information on RTI 2005.


Agriculture


Animal Husbandry & Fisheries

Animal Husbandry & Fisheries


Fisheries


Dairies



Building Construction


Cabinet Secretariat and Co-ordination


Disaster Management


Excise Department


Finance


Food, Supplies and Commerce


Forest


Govt. Women's Polytechnics, Patna


Industries Dept.


Handloom & Sericulture


Human Resources Development


Information & Public Relations


Labour, Employment and Training

Employment & Training


Training


Medical Services


Social Securities



Mines and Geology


Minor Irrigation


Minority Welfare


National Savings


Office of the Chief Election Officer


Panchayat Raj


Parliamentary Affairs


Planning


Public Health Engineering Dept.


Registration


Revenue and Land Reforms


Road Construction


Rural Development


Rural Engineering Organisation


Rural Works


State Board of Technical Education (SBTE)


Science and Technology


Social Welfare


Sugarcane


Tourism


Urban Development


Water Resources


Welfare

Backward and Very Backward Class


Schedule Caste & Schedule Tribe



Youth, Art & Culture

Directorate of Student and Youth Welfare


Directorate of Archaeology


Directorate of Museum



LIST OF ENGINEERING COLLEGE
SN Name of Engineering Colleges & Address Status Contact URL / Details Affiliation from
University / Board AICTE Approval Session 09-10

1 Indian Institute of Technology, Patna
New Govt. Polytechnic Campus,
Patliputra Colony, Patna – 800013 Govt www.iitp.ac.in
0612-2552067
0612-2277383 ( Fax ) Deemed University
2 National Institute of Technology, Patna
Ashok Rajpath, Patna Govt www.nitp.ac.in
0612-2371715, 2371929,
2371930, 2370419,2370843 Deemed University
3 Muzaffarpur Institute of Technolgy,
Muzaffarpur Govt www.mitmuzaffarpur.org
0621-2262148 BRA. Bihar University, Muzaffarpur 09-10
4 Bhagalpur College of Engineering, Bhagalpur P.O Sabour Bhagalpur- 813210 Govt www.becbhagalpur.ac.in
0641-2451063
0641-2451063 (Fax) T.M Bhagalpur University , Bhagalpur 09-10
5 Nalanda College of Engineering, Chandi
Nalanda Govt Magadh University, Gaya 09-10
6 Motihari College of Engineering, Motihari
East Champaran Govt 06252-290699 BRA. Bihar University, Muzaffarpur 09-10
7 Gaya Engg. College, Gaya
Sri Krishna Nagar
P.O Nagari Yana Via Buniyadganij
Gaya-823001 Govt Magadh University, Gaya 09-10
8 Darbhanga Engg. College,
Darbhanga Mabbi Darbhanga
P.O Lal Sahpur Via PTC-846005 Govt 06272-246827 LN Mithila University, Darbanga 09-10
9 Sanjay Gandhi Institution of Technology, Patna Govt Rajendra Agricultural University Pusa, Samstipur 09-10

Affiliated Institutes



SL Name of the Institute Code Address, Website, E-Mail Telephone Session
Permanent Affiliation (Govt. Institution)
1. Govt. Polytechnic,
Barauni 11 P.O.-ULAO, Dist-Begusarai, Pin-851134.
E-Mail: polytechnic_bgs@yahoo.co.in
0624-3242102 2010-11
2. Govt. Polytechnic,
Bhagalpur 12 Principal, P.O.-Barari, G.P. Bhagalpur, Bihar.
Pin - 812003. E-Mail: jawaharlal_principal@yahoo.co.in
0641-2400717 2010-11
3. Govt. Polytechnic,
Chapra. 13 AT+P.O.-Marhowrah, Pin-841418.
E-Mail: gpcha-bih@nic.in
0615-9231076 2010-11
4. Govt. Polytechnic,
Darbhanga 14 P.O.-Lal Bagh, Dist-Darbhanga, Pin-846004.
E-Mail: gpdar-bih@gmail.com
0627-2247331 2010-11
5. Govt. Polytechnic,
Gaya 15 AT+P.O.-Ghooghri Tand, Pin-823001.
E-Mail: brogaya_gpg@dataone.in
0631-2224093
0631-2224094 2010-11
6. Govt. Polytechnic,
Gopalganj 16 AT+P.O.-Gopalganj, Pin-841428.
E-Mail: 0615-6282505 2010-11
7. Govt. Polytechnic,
Muzaffarpur 17 AT-Mayatola, P.O.-HPO, Muzaffarpur, Pin-842002.
E-Mail: principal-gpm@yahoo.in
0621-2247675 2010-11
8. Govt. Polytechnic,
Patna-7 18 G.P. Gulzarbagh, Patna. AT+PO - Gulzarbagh.
Pin - 800007. E-Mail: gpp7-bih@nic.in
0612-2631279 2010-11
9. Govt. Polytechnic,
Purnea 19 AT+P.O.-Purnea, Pin-854303.
E-Mail: 0645-4242564 2010-11
10. Govt. Polytechnic,
Saharsa 20 P.O.+Dist-Saharsa, Pin-852201.
E-Mail: 0647-8223517 2010-11
11. New Govt. Polytechnic,
Patna-13
21 N.G.P., Patliputra, Patna. Pin - 800013.
Website: www.polypat.org
E-Mail: ngpp13_bih@nic.in
0612-2262866
0612-2262700 2010-11
12. Govt. Womens Polytechnic,
Muzaffarpur 22 AT-Gannipur, P.O.-HPO Muzaffarpur, Pin-842001.
E-Mail: principal_gwp_muz@yahoo.co.in
0621-2213009 2010-11
13. Govt. Womens Polytechnic,
Patna 23 G.W.P. Patna, Sahay Nagar, Phulwari Sharif,
Patna. Pin - 801506.
Website: www.gwp.bih.nic.in
0612-2225934 2010-11
Part-Time Diploma
1. Govt. Polytechnic,
Barauni 51 P.O.-ULAO, Dist-Begusarai, Pin-851134.
E-Mail: polytechnic_bgs@yahoo.co.in
- 2010-11
2. New Govt. Polytechnic,
Patna-13
61 N.G.P., Patliputra, Patna. Pin - 800013.
Website: www.polypat.org
E-Mail: ngpp13_bih@nic.in
0612-2262866
0612-2262700 2010-11
Provisional Affiliation (Pvt. Institution)
1. PIHMCT, Patna 71 Amit Hotel Campus, New Bypass Road,
Anisabad, Patna. Pin - 800002.
Website: www.pihmct.info
E-Mail: pihmct_patna@yahoo.co.in
0612-2252340
80849-04789 2009-10
2. Azmet College of Engineering
and Technology, Kishanganj. 72 AT-Salki, Tengarmari, PO-Gachhpara,
District-Kishanganj, Bihar.
Pin-855108.
Website: www.azmet.org.in
E-Mail: info.azmetcet@gmail.com
06456-247888
09431076873 2009-10
3. Millia Polytechnic, Purnea 73 Rambagh, Purnea.
Website: www.milliapolytechnic.org.in
06454-240433
06454-240434 2009-10
4. Buddha Institute of Technology,
Gaya. 74 Plot No. B3(P) Industrial Area, Gaya
(Gaya Dhobi Road, Behind Rituraj Cold Storage)
Website: www.bodhgayabit.org
0631-2431871
09708423890 2009-10


WIS Branches


SL Name of the Institute Affiliation Subjects
1. Government Women's School, Ara. 1961 1. Cutting and Tailoring

2. Machine Embroidery and Machine Knitting

3. Hand Embroidery and Hand Knitting

4. Hand Embroidery and Toys & Dolls

5. Hand Embroidery and Machine Knitting

6. Toys & Dolls and Machine Knitting

7. Machine Embroidery and Hand Knitting


2. Government Women's School, Bhagalpur. 1961 1. Cutting and Tailoring

2. Machine Embroidery and Hand Knitting

3. Machine Embroidery and Toys & Dolls


3. Government Women's School, Chapra. 1976 1. Cutting and Tailoring

2. Machine Embroidery and Hand Knitting

3. Machine Embroidery and Toys & Dolls

4. Hand Embroidery and Machine Knitting

5. Toys & Dolls and Machine Knitting


4. Government Women's School, Darbhanga. 1961 1. Cutting and Tailoring

2. Hand Embroidery and Toys & Dolls

3. Hand Embroidery and Machine Knitting


5. Government Women's School, Gaya. 1960 1. Cutting and Tailoring

2. Machine Embroidery and Toys & Dolls

3. Hand Embroidery and Hand Knitting


6. Government Women's School, Motihari. 1975 1. Cutting and Tailoring

2. Machine Embroidery and Hand Knitting


7. Government Women's School, Munger. 1960 1. Cutting and Tailoring

2. Machine Embroidery and Hand Knitting

3. Hand Embroidery and Hand Knitting

4. Toys & Dolls and Hand Knitting

5. Hand Embroidery and Toys & Dolls

6. Machine Embroidery and Toys & Dolls


8. Government Women's School, Muzaffarpur. 1960 1. Cutting and Tailoring

2. Machine Embroidery and Machine Knitting


9. Government Women's School, Paharpur, Gaya. 1980 1. Cutting and Tailoring

2. Toys & Dolls and Machine Knitting

3. Hand Embroidery and Machine Embroidery


10. Government Women's School, Purnea. 1960 1. Cutting and Tailoring

2. Machine Embroidery and Hand Knitting

3. Hand Embroidery and Machine Embroidery

4. Machine Embroidery and Toys & Dolls

5. Machine Embroidery and Machine Knitting


11. Government Women's School, Saharsa.


SITEMAP
• Home
• Functions
• Technical Education
1. Engineering College
a. List of Engineering College
b. Intake Capacity
2. Polytechnic
a. List of Polytechnic
b. Intake Capacity
3. WIS
4. Other Institution
a. SBTE
b. BCST
c. ISG
d. BIRSAC
• Acts & Rules
a. BCECB ACT
b. AICTE Act
c. Aryabhatt University Act


http://India.gov.in
HOW DO I?
• Search State Electoral Roll Details ..
• Register your complaints online to O..
• Track status of suggestion submitted..
• Online Filing of Returns for Commerc..



GOVERNMENT

• Constitution of India
• Who's Who
• Parliament
• Rules
• Acts
• Schemes
• Directories
• Gazetteers
CITIZENS

• Health
• Education
• Employment
• Taxes
• Law & Order
• Travel & Tourism
• Housing
• Agriculture
OVERSEAS

• Visit India
• Study in India
• Indian Diaspora
• Passport/VISA
• Embassies & Consulates
• Travel Advisory














Eralokkumar’s



Presentation Information


Login to eralokkumar.blogspot.com




Important Links:

Directory
MHRD
GOI
Parliament of India

AICTE-INDIA
UGC
NCTE

Planning Commission

AIU
DST
DOE
NPTEL
DELNET
INFLIBNET
ABET

GATE
NCVT
SBTE

All State Government (India)

Andaman & Nicobar (UT)
Andhra Pradesh
Arunachal Pradesh
Assam
Bihar
Chandigarh (UT)
Chhattisgarh
Dadra and Nagar Haveli (UT)
Daman and Diu (UT)
Delhi (UT)
Goa
Gujarat
Haryana
Himachal Pradesh
Jammu and Kashmir
Jharkhand
Karnataka
Kerala
Lakshadweep (UT)
Madhya Pradesh
Maharashtra
Manipur
Meghalaya
Mizoram
Nagaland
Orissa
Puducherry (UT)
Punjab
Rajasthan
Sikkim
Tamil Nadu
Tripura
Uttar Pradesh
Uttarakhand
West Bengal

Sarvashiksha Abhiyan

TEQIP
JEE
GATE
AIEEE
GPAT
Online practice tests. Analyze & improve your scores instantly!
TOEFL
AIEEE
IITJEE
BITSAT






LIST OF UNIVERSITIES, COLLEGES & INSTITUTES IN INDIA

Andhra Pradesh
Assam
Bihar
Delhi
Goa
Gujarat
Haryana
Himachal Pradesh
Jammu Kashmir
Karnataka
Kerala
Maharashtra
Manipur
Meghalaya
Madhya Pradesh
Pondicherry
Punjab
Rajasthan
Tamil Nadu
Uttar Pradesh
West Bengal




Educational Institutes
If you wish to be featured in this section or any other relevant sections
(in case we have omitted to do so or have missed out any information)
Please do let us know immediately.
Email information-
Click here!

Leading Colleges in India
CAREER PAGE

Beauty | Mehendi | Recipes | Careers & Jobs | Matrimonial |

| Horoscope | Personal Problems |Sex Education | Doctor Online | |E-Greetings | E-Shopping | Yoga | Destination India | India Virtual Tour | Kids Corner | Baby Names | Jokes | Indian Universities & Colleges | Contests |Weather | News |World Guide | World Time |
Currency Converter | About us | Contact Us | Feedback | Privacy Policy | Terms of Use
hindustanlink.com
------------------------------------------------------------------------------------------------
Total Recall:

How to Remember Your Speech without Memorizing

We all fear that moment when we speak to audiences. You look out on a sea of faces and your mind goes blank.
You can't remember your next point and you wish you could disappear with your memory.
You can avoid blanking out when you know how to maximize your mind.
These tips will help you achieve total recall of your talk:
Rehearse out loud.
You'll remember more when you hear your own voice.
Tape it and play it back.
Listen to it in the car or as you fall asleep.
2. Practice the 3x5, 3x5 Rules.
Avoid one lengthy rehearsal.
Instead, take short chunks and practice them 3 to 5 times a day for 3 to 5 days.
Frequency of repetition aids memory.
3. Create key words and phrases.
The idea is to memorize concepts-not words.
The more verbiage, the more difficult to remember.
Bullet points allow you to talk about your points and not read your slides.
4. Exaggerate the visual.
For each concept or bullet, take the key word and turn it upside down, enlarge it, color code it, change the font.
Exaggeration makes the concept more memorable and aids retention.
(Of course, this is done during rehearsal and not for the eyes of the audience.)
5. Use pictures. The mind thinks in pictures-not in words.
Use icons, graphics, and symbols as prompts and you'll be amazed at how easily you remember your content.
6. Tell your story.
People learn better and retain more when you tell stories.
A situation that you experienced has a natural sequence to help you recall events.
Stories don't have to be touchy feely.
Reveal an interesting experience as a case study or tell a before and after success scenario.
7. Engage other senses. This is called synesthesia.
Your recall increases as you intensity your experience.
For example, if you're talking about a financial downturn in the market, imagine hearing a warning siren or feel what it's like to be in a torrential downpour.
8. Associate. Take your concepts and create an acronym.
To recall the process of managing question and answer periods I use the word CRAM-concentrate, repeat, answer, move on. Comedians use this technique.
They assign each story or "bit" with a key word.
They take the first letter of the key word from each story and form an acronym.
This keeps them on track and they can easily access the segments in correct sequence for a one hour monologue without notes!
9. Make complex data concrete.
Use analogies and demonstrations to make the data come alive.
The audience will understand it better and you will recall it more easily.
10. Get physical.
By acting out parts of the presentation you maximize your memory.
Walk to one side of the room , When you are talking about past history.
Then move the opposite side when you're making future projections.
You'll trigger your memory when you physically change your position.
And the audience will be anchored to hear your message.
11. Recover with grace.
If you do forget, pause and give yourself time to remember.
Or use humor. But have a fall back exercise.
Ask the audience to repeat your last three points.
Put them in pairs and have them talk to their partner for one minute about an important point.
This give you time to recall and recover.
When it comes to remembering your speech, you can blank out.
But, you can achieve Total Recall with above practices regularly.

Presentation skills and tactics
The Secret Language of Money

At a number of business seminars and presentations, I passed out an index card and asked each person in the audience to write anonymously a single answer to each of three questions.

The three questions are:
Just Say No to PowerPoint: Enough is enough!
Have you ever been slide swiped?

You walk into a meeting and once everyone has arrived, the lights are often dimmed and the show begins.

The presenter clicks the mouse again and again, showing you slide after slide until you can take no more.

Exasperated, you shut your eyes and doze off.

You have just been slide swiped!
After the Speech
Usually the emphasis on making an effective speech is what you do in preparation before the presentation begins.

But if you speak very much, what you do after the speech can help you become a more effective speaker.

As soon as possible after the speech, write down impressions of how you felt the speech went.

Answer at least two questions about the speech: What was the best part of the speech? What part of the speech can be improved the next time?

Some of your best ideas will come to you as you are speaking.

Write them down as soon as the speech is over so you can be prepared to use those lines or ideas the next time you speak.

Think about the peaks and valleys in the speech.

Consider when the audience seemed to listen best and when the audience seemed restless and disinterested.

Write down your reactions while they are fresh on your mind.

Talk to someone about the speech within the first day after your presentation.

You'll remember best what you talked about and you might discover a better way of telling a story or making a point as you summarize your speech to a friend or colleague.

Keep track of stories you tell and case studies you include so you'll not repeat yourself if you speak to that audience again.

In addition, keep records of how long you spoke, what you wore, key people you met, and anything unusual about the speaking context.

Occasionally look back over your records of individual speeches and look for trends in your speaking that you are unaware of.

When you speak to this group again, this information will be the basis for your audience analysis.

This is especially important if you speak frequently within your company and your audience will be made up of listeners who have heard you before.

You don't want to develop a reputation for telling the same stories over and over.

If the group has speaker evaluations, ask that a copy of the summary be sent to you.

Look for any pattern in the comments as you analyze the summary.

If one person said you talked too slowly, it may be a personal preference and you don't need to give much consideration to the critique.

If four or five people make that comment, however, then you might want to consider changing the pace of your speaking for the next speech.

Certainly your main concern should be with your preparation before the speech.

However, don't underestimate the effort of what you do in analyzing the speech after the audience has left the room.
Incorporate Humor in Your Next Speech
Some speakers say I could never use humor in my speech; I just don’t feel comfortable with it.?

I believe that anyone can use humor and that it is a valuable tool in speaking.

Appropriate humor relaxes an audience and makes it feel more comfortable with you as the speaker; humor can bring attention to the point you are making; and humor will help the audience better remember your point.

It can break down barriers so that the audience is more receptive to your ideas.

First, let me make it easy for you to use humor.

The best and most comfortable place to find humor for a speech is from your own personal experience.

Think back on an embarrassing moment that you might have thought not funny at the time.

Now that you can laugh at the experience, you understand the old adage "Humor is simply tragedy separated by time and space."

Or think of a conversation that was funny.

Remember the punch line and use it in your speech.

Probably the least risky use of humor is a cartoon.

The cartoon is separate from you and if people don't laugh, you don't feel responsible.

(Be sure to secure permission to use it.)

You're not trying to be a comedian; you just want to make it easy for people to pay attention and to help them remember your point.

Here are some suggestions on using humor to make your next speech have more impact.

Make sure the humor is funny to you.

If you don’t laugh or smile at the cartoon, joke, pun, one-liner, story, or other forms of humor, then you certainly cannot expect an audience to do so.


A key to using humor is only using humor that makes you laugh or smile.

1. Before using humor in your speech, try it out with small groups of people. Do they seem to enjoy it? Even if your experimental group does not laugh or smile initially, don’t give up on the humor, because the problem might be in the way you are delivering the joke or quip. I often use this line in talking about the importance of listening. We are geared to a talk society. Someone said, the only reason we listen is so we can talk next!'? When I first tried that line, people did not smile; but I worked on the timing so that I paused and smiled after listen and that seemed to work. I was rushing through the punch line and did not give people time to be prepared for the humorous part. It took practice to get comfortable with the piece of humor. Only use humor in a speech after you are comfortable telling it from memory and have tested it.
2. Make sure the humor relates to the point you are making. Do not use humor that is simply there to make the audience laugh. The humor should tie in with some aspect of your speech. For example, I tell about my experience of getting braces at age 46 and how difficult it was for me to get used to the wires and rubber bands in my mouth. After I tell the story I make the point that you may have not had the braces problem I had, but we all have challenges in communicating well, and what we want to look at today are ways of making it easier for us to be more effective in speaking. The audience enjoys the story but also remembers the point that I'm making. If you don’t tie your humor to your presentation, the audience may like the humor, but will wonder what point you are attempting to make.
3. Begin with something short. A starting point might be to summarize a cartoon and give the caption as your humor. A thought-provoking yet clever line about a point you are making is another way to get started. For example, when I talk about creativity and getting out of your comfort zone, a line I found that worked well was, ?Orville Wright did not have a pilots license.? In your reading, look for lines that make you smile; consider how they might be used in your next speech. Be careful about launching into a long humorous story--audiences are quick to forgive a single line that may not be funny, but they do not have much patience with a long anecdote that isn’t worth the time. So start out with brief bits of humor.
4. When possible, choose humor that comes from people you interact with. You do not have to worry about people having heard it before, and you will feel more comfortable with what has happened to you. Find such experiences by looking for a humorous line or situation. For example, I was making a bank deposit recently at a drive-in window. When I asked to make a second deposit, the teller said solemnly, I am sorry, sir, but you’ll have to go around the bank a second time to make a second deposit? We both laughed and I may have a line to work into a speech. If you have small children, listen for something they say that might be funny to an audience as well. Art Link letter made a great living on the notion that Kids say the darndest things?
5. Don’t preview by saying, Let me tell you a funny story. Let the audience decide for themselves. Look pleasant and smile as you launch into your funny line, but if no one smiles or laughs then just move on as though you meant for it to be serious. This approach takes the pressure off as you relate the humor. Remember you are not a comedian entertaining the audience; you are a serious speaker seeking to help the audience remember and pay attention by using humor as a tool.
6. Humor is simply another way of making a point with your audience, and it can help you be a more effective speaker. Look at humor as a tool in improving your speech in the manner of attention devices, smooth transitions, and solid structure. Remember, a smile is a curve that straightens out a lot of things.
Super Preparation- Keys to Getting a Great Start to Every Presentation
8 Ways to Improve Your Presentation Skills
Shamus Browns Top 5 Sales Presentation Tips
When its time to give your next sales presentation, here are my favorite tips for delivering powerful, charismatic, and engaging sales presentations. #1 - PLANT YOUR FEET SQUARELY ON THE FLOOR
How to Attract New Business like George W. Bush Wins Elections
THE LITTLE-KNOWN SPEECHWRITING SECRETS THAT WON GEORGE W. BUSH THE US ELECTION
Being Real From the Platform
Let it be known, no person, thing, or situation can validate you. You validate yourself by realizing who you are.? Mark Tosoni
Creating a Powerful Sales Presentation
The quality of your sales presentation will often determine whether a prospect buys from you or one of your competitors. However, experience has taught me that most presentations lack pizzazz and are seldom compelling enough to motivate the other person to make a buying decision. Here are seven strategies that will help you create a presentation that will differentiate you from your competition.
PowerPoint Sales Presentations Are Boring - Stop It!
As the meeting began, the project manager of the buying committee told me that the key decision-maker would miss the first 20 minutes or so of my presentation.

This was a very competitive sale that I was working on at the time.

There were about a dozen or so business-people from the prospect company that I was selling to in this meeting.

The presentation was scheduled to last about 90 minutes.

During the first 20 minutes I had planned to cover my "persuasive arguments" (that is my company and product benefits).
Fading into Sameness: How Too Many Slides Can Ruin Your Presentation
I have a love/hate relationship with PowerPoint. In the right hands, it's a great presentation tool.

In the wrong hands (and unfortunately, most usage falls into this category) we are cloning generations of boring slide shows narrated by speakers we barely notice." - Debbie Bailey
Trade Show Victory!
So you're going to have a booth at a trade show. How exciting - or how terrifying - depending on your state of mind!
Wow! Is That ME? - Creating a Powerful One-Page Bio
First of all, what is a bio sheet and why do you need one?

A bio sheet is a one page description of who you are--your background and achievements.

Your bio is an important part of how you present yourself to potential clients.

You may include it in your media kit, in proposals to clients, and anywhere you want to establish your credibility and expert reputation.
How Storytelling Can Grow Your Business
People love stories. We love to hear about other people, and stories help us to learn, remember and put to use new concepts.

Aesop knew this. His fables help us to learn life lessons through tales about others, without having to learn them the hard way.

Rise Above Cattiness

Cattiness is something no one ever wants to be accused of doing.

But the reality is, at one time or another you've probably engaged in it, and most likely, you'll do it again.

This trait can include any number of unfortunate behaviors from not saying what we really intend to say, to saying things in a harsh tone of voice. It also includes gossiping, cynical remarks, and on a grander scale, outright rudeness.

Cattiness can stand in the way of marketing your business since what you say and how you say it is critical in building rapport with potential clients and customers.

Think about how you come across to the people you interact with on a daily basis.

Check in with your attitude and behavior to make sure you are coming from your best place at all times.

Tips to Temper Speaking Anxiety
People take it for granted that leaders have achieved some skill in public speaking.

Yet anxiety persists because leaders face very challenging situations and have a great risk of embarrassment.

Here are some tips for tempering those anxieties.
Keep Knockout Presentations: How to Deliver Your Message with Power, Punch, and Pizzazz.
To subscribe to Impact Player, a free online newsletter visit http://www.diresta.com

RELATED ARTICLES
________________________________________
Present Statistics In Context
"I didn't have 3000 pairs of shoes. I had only 1600 pairs." Imelda Marcos
________________________________________
Four Different Ways People Process Your Information
There are four different ways that audience members assimilate information. They are: visual, auditory, auditory digital, and kinesthetic. While all members of the audience will process information utilizing all four of these approaches at different times, each audience member will individually will individually tend to rely on one of these approaches more than the other three.
________________________________________
How to Teach: Lecture vs. Discussion
WHEN ONLY A LECTURE WILL DO: Under certain circumstances, of course, the lecture is the only workable format. For instance, when it is necessary to reach a large audience in a short time frame, or when the attendees have no knowledge of the subject whatsoever, there is really no choice. But whenever possible, alternative methods should be investigated. If you choose to rely solely on lectures, be aware that you do so for your own convenience and comfort, rather than for the effectiveness of the training. Abandoning the lecture format for that of group discussion requires that the trainer step back from leadership and take up the role of facilitator - a position much closer to that of the participant. If this method of training is one that you would like to explore, it is first necessary to examine potential problems which make group discussions difficult for some trainers.
________________________________________
Writing The Query Letter
The query letter is simply a business letter that serves a dualpurpose. It is an introduction of you to an agent, and an inquiryas to whether the agent would be interested in seeing a particularpiece of your work. The query letter is the first "picture" an agentwill have of you and your work; and is perhaps your strongestselling tool.
________________________________________
Rise Above Cattiness
Cattiness is something no one ever wants to be accused of doing. But the reality is, at one time or another you've probably engaged in it, and most likely, you'll do it again. This trait can include any number of unfortunate behaviors from not saying what we really intend to say, to saying things in a harsh tone of voice. It also includes gossiping, cynical remarks, and on a grander scale, outright rudeness. Cattiness can stand in the way of marketing your business since what you say and how you say it is critical in building rapport with potential clients and customers. Think about how you come across to the people you interact with on a daily basis. Check in with your attitude and behavior to make sure you are coming from your best place at all times.
________________________________________
Tips to Temper Speaking Anxiety
People take it for granted that leaders have achieved some skill in public speaking. Yet anxiety persists because leaders face very challenging situations and have a great risk of embarrassment. Here are some tips for tempering those anxieties.
________________________________________
Cell Phone Dos And Dont During A Meeting
What would we do without our cell phones? Wow, there's a scary question. It's hard to imagine a world without them. But cell phones, connected as they may keep us, seem to have an amazing power to disturb and trump face to face interaction. For example, why is it that during a meal or a meeting, people insist on taking every call? Even worse, just let the phone ring? They forget all about the person across the table as if they were invisible!
________________________________________
Creating Your Presentation Success With a Positive ?I CAN? Attitude
According to the Lamalle Report on Top Executives of the 1990s, one of the most important factors in determining financial success by those earning over $250,000 is being enthusiastic and having a positive attitude (46%). Apparently, successful people never underestimate the power of positive thinking.
________________________________________
Cross Cultural Presentations
The international flavour of many people's jobs naturally means that there is greater interaction between people from different cultures. Within the business environment, understanding and coping with intercultural differences between people is critical to ensuring that interpersonal communication is successful.
________________________________________
Ancient PowerPoint Secrets: Ask Your Grandma!
Yes, there are ancient PowerPoint secrets...secrets your grandmother knows and is probably willing to pass down to you.
________________________________________
Top Ten Tips For Better Business Presentations To Asian Audiences
Audiences around the world are all different. Cultural, social and religious differences impact on how people learn, take in information and interact with presenters.
________________________________________
Presentation Power Does Not Come From PowerPoint
You speak before a group. You present your message. You might be selling your product, service or yourself. How do you present yourself with power?
________________________________________
Ten Fun Ways to Liven up Any Presentation
Most of us would agree that having humor in our lives increases rapport, strengthens our relationships and overcomes communication barriers. People who work in a positive, often playful environment are more likely to stay. Productivity and creativity increase while stress is reduced. We just feel better after a good laugh. Think funny!
________________________________________
Your Unique Point of View
I had a chance to go to one of those big positive thinking rallies recently. I am one of those positive personal growth people that really enjoy that kind of thing. Throughout the day, I heard presentation after presentation from some of the best professional speakers in the business; General Tommy Franks, Mayor Rudy Guiliani, legendary Comedian Jerry Lewis and my hero, Zig Ziglar. They presented and spoke amazingly well. They were original.
________________________________________
Handling Questions with Authority
At some point in your presentation you will be expected to answer questions from your audience. They might have some burning questions that need to be answered before they buy into your message. Handling their questions with authority can make the difference for you between a successful presentation and a waste of time. This is the opportunity for the audience to test your knowledge on the topic and commitment to your message.
________________________________________
How to Begin a Lesson Plan
DEVELOPING LESSON PLANS: In developing lesson plan formats, two things are paramount: extraordinarily careful documentation and room left for possible changes. Sloppy accounting of the direction your class will be going is worse than none. And documentation that doesn't have leeway for change is almost instantly obsolete. The types of plan formats generally used are the: outline, sentence outline, narrative outline, narrative. The primary difference is in the amount of information and narrative in the body of the presentation. Your plan for a presentation should be at least a sentence outline or preferably a narrative outline.
________________________________________
Why You Need a Lesson Plan
LESSON PLAN DEVELOPMENT: Lesson plans, believe it or not, are a lot like the maps you have in the back seat of your car. They're probably not covered with the ketchup and pencil marks that your maps are, but they are directional guides. You need some way of checking to see if you are on the right road in your classroom or on the highway. A lesson plan is really nothing more than a map of where you and your students will be heading for the time you are together. To paraphrase the American Express Card commercial, "Lesson plans -- don't leave home without them."
________________________________________
Polishing Your Sales Presentation
Summer is here! It's time to bring out your summer attire, take a vacation and reflect upon your achievements thus far this year. Look back at the past few months of your sales production . . . are you on target for all your sales goals for 2005? Are you making the sales from all your sales presentations?
________________________________________
How To Run Your Greatest Conference Ever
Like most good achievements, a magnificent meeting depends on planning and preparation. These are essential to a good conference and this article explains the basics of what you need to do.
________________________________________
The Relationship between Information Sender and Receiver: The Art of Communication
For communication to take place, a message must be transmitted by a communicator and correctly received by a listener. If the message is not understood, there is no communication. There is only noise. Between the transmission and reception of a message, much can go wrong. Communication, by definition, involves at least two individuals, the sender and the receiver. There are certain filters or barriers which determine whether or not the message is actually transmitted or received.
________________________________________
BANNERLINKER
CLASSIFIEDSPK
COMPLETEB2B
DOMAINSTRADE
EBUSINESSPORT
FULLTIMEFUN
GARMENTSNETWORK
GEMS22
GULFVEHICLES
INDIANCOMMERCIALS
JOBS22
KHURRUM
OMANTRADERS
PAKAUTOMOBILES
PETROSCRAP
PKBUSINESS
PKGARMENTS
SURPLUSOFFERS
TOPDEALINGS
TRADERS22
UAECLASSIFIEDS
UAECOMPUTERS
UAEGARMENTS
UAEMETALS
UAEMOBILES
UAEPLASTICS
UAEPROPERTIES
UAEPROPERTY
UAEREALESTATE
UAESTOCKLOTS
UAETOPICS
UAETRADERS
UAEVEHICLES
URLSUBMITS
USACOMMERCIALS
YOUNGDEALERS


www.cosmos22.com


Mechanical Engineering

DEPARTMENT OF MECHANICAL ENGINEERING
Mechanical Engineering is an engineering discipline that was developed from the application of principles from physics and materials science. According to the American Heritage Dictionary, it is the branch of engineering that encompasses the generation and application of heat and mechanical power and the design, production, and use of machines and tools. It is one of the oldest and broadest engineering disciplines.
The field requires a solid understanding of core concepts including mechanics, kinematics, thermodynamics, fluid mechanics, heat transfer, materials science, and energy. Mechanical engineers use the core principles as well as other knowledge in the field to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, motor vehicles, aircraft, watercraft, robotics, medical devices and more.
The department is well equipped with a gamut of specialized equipments in the laboratories to provide sound knowledge of the subjects by performing experiments. Rigorous workshop training in the areas of machine shop, carpentry, welding, sheet metal and foundry etc. form an inextricable part of the curriculum.
The department is has state of art facilities to impart quality education to the students. The department also boost of having distinguished, dedicated and competent faculty members to impart quality education, project guidance, personality development, group discussion and self esteem enhancement of the students to enable them to pursue a successful career ahead.
FACULTY PROFILE
NAME DESIGNATION QUALIFICATION CONTACT PHOTO
Mr. Umesh Nand Mishra Prof. B.Sc (Engg.), M. Tech. Mail


Mr. Niraj Kumar Mishra Asst. Prof. B.Tech , M.Tech (Heat Power) Mail


Mr.Rinku Kumar Asst. Prof. B.Tech, M .Tech Mail


Mr. Rajkumar Sahoo Asst. Prof. B.Tech , M.Tech Mail


Mr. Swarnambuj Suman Lecturer cum W/S Supdt. B.Tech Mail


WORKSHOP STAFF
NAME DESIGNATION QUALIFICATION
Mr. Swarnambuj Suman W/S Supdt B.Tech.
Mr. Kinker Prasad Pandit Technician ITI
Mr. Naresh Kumar Technician ITI
COURSE STRUCTURE
FIRST YEAR
ENGINEERING DRAWING
• Learning drafting codes as per ISO and IS preparation and use of scales. Technical lettering.
• Projection of points and straight lines.
• Projection of simple solids, cylinders, cones, parallelepiped & pyramids in orthographic and isometric projections.
• Section of simple solids.
• Simple cases of interpretation of solids and development of plane and curved surfaces.
• Introduction, construction of nomo grams, histograms, frequency distribution, distribution of mean, median, mode. Perspective projection. Principles of Perspective projection by orthographic method and vanishing point (one and two vanishing point Perspective projection of simple solids).
Books recommended.
• Engineering drawing by N D Bhatt, V M Panchal.
• Text book on engineering drawing by K L Narayana , P. Kannaiah.
WORKSHOP-I
Carpentry
• Plaining of wood size; the exercise should include making all the sides true and square with the help of saws, chisels and jack- plane.
• Use of pre-planned pieces to make typical joints. Tenon, mortise dovetail.
Fitting
• Familiarization with hand tools like centre punch, hacksaw, files, chisels, etc. and preparing a 6 mm thick mild steel piece to a given size(including square, vee , half round and dove tail cuts)
• The matching of filed parts
• Marking, drilling, reaming and tapping a soft cast block shaped to size.
Smithy
• Study of hearth
• Exercise in upsetting, fullering, forming, bending, etc. from rods using swage blocks and hand tools. Making a utility item like claw hammer, screw drivers etc.
Foundry
• Preparation of moulding sand, core sand etc. making moulds with the given pattern and core boxes. Melting of cast iron or aluminum and pouring into moulds.
ENGINEERING MECHANICS
First Term
1. Introduction: Idealization of mechanics, concept of rigid body, external forces(body forces & surface forces ). Laws of mechanics.
2. Vector methods: Equality and equivalence of vectors. Free and bound vectors. Principle of transmissibility of forces. Moment of a force about a point and about a line. Couple and moment of a couple, couple moments as a free vector, addition and subtraction of couples.
3. Various systems of forces: statically equivalent forces systems, simplest equivalent of a system of forces.
4. Equilibrium: force analysis, free body diagram , equation of equilibrium and their applications to various system of forces. Plane trusses.
5. Friction: friction on dry surfaces. Static, kinetic and rolling friction. Application to inclined planes, wedge and blocks, belt & pulleys.
Second Term
1. Kinematics and kinetics of a particle: rectilinear and curvilinear translation. Normal and tangential components of acceleration. Radial and transverse components of acceleration, projectile, motion on a smooth vertical curve.
2. Impulse and momentum: linear impulse and linear momentum angular impulse and angular momentum impact of elastic, semi elastic and plastic bodies.
3. Kinematics and kinetics of rigid bodies: angular velocity and angular acceleration. Effective forces on a body. D’Alembert’s principle- application to highways and railway tracks. Instantaneous centre of zero velocity, compound pendulum, centre of percussion, rotation of rigid bodies. Rolling motion. Plane motion of rigid bodies. Simple application- four bar mechanism.
4. Work energy and power: work done by forces and couples potential, elastic and kinetic energy, work energy conservation of energy, concept of power and energy.
Books recommended.
1. Engineering mechanics— I. M. Shames.
2. Vector mechanics (statics and dynamics) --- F.B.Beer & E.R. Johnston.
3. Engineering mechanics ---- S.Timisheno & T.Yong
4. Engineering mechanics ---- K L Kumar
5. Engineering mechanics --- D S Kumar
6. Engineering mechanics --- R K Rajput.
LABORATORIES
Engineering Mechanics Laboratory
Students must perform at least ten experiments from the following list of experiments-
1. Cantilever Beam- To determine experimentally the bending moment in a cantilever beam and to compare the experimental values with the theoretical values.
2. Simply Supported Beam- To determine experimentally the bending moment in a simply supported beam and to compare the experimental values with the theoretical values.
3. Winch Crab-To determine effort required raising various loads using a single purchase winch crab apparatus and hence to calculate its velocity ratio, mechanical advantage, and effort lost in friction and efficiency. Also, plot various graphs.
4. Helical Spring-To study the compression/ extension of helical spring and to find the stiffness and modulus of rigidity.
5. Funicular Polygon-To determine the magnitude, direction and position of the resultant force experimentally and also to check the same graphically by constructing the funicular diagram.
6. Worm and Worm Wheel-To determine the effort required to raise various loads using the worm & worm wheel apparatus and draw the various graphs.
7. Flywheel-To determine the moment of inertia of a flywheel by falling weight method and to determine the frictional moment in the bearing.
8. Screw Jack-To determine the effort required raising various loads using screw jack apparatus and hence to calculate its velocity ratio, mechanical advantage, and effort lost in friction and efficiency. Also, plot various graphs.
9. Coefficient of Friction-To determine the coefficient of static friction and its range, between any two given material surface with the help of an inclined plane.
10. Belt and Pulley-To determine the value of coefficient of friction between the belt and the pulley.
11. Rolling Wheel-To determine moment of inertia of a rolling wheel.
ENGINEERING DRAWING LAB
Students must prepare following drawing sheets (at least 10) containing minimum 04 to 06 problems on the topic-
1. Lettering and dimensioning
2. Projection of straight lines
3. Projection of planes
4. Projection of solids
5. Projection of section of solids
6. Projection of interpenetration of solids
7. Development of surfaces
8. Orthographic projections
9. Plane, diagonal and vernier scales
10. Functional scale and nomo grams
11. Isometric projections
12. Perspective view projections
13. Auxiliary plane projections
WORKSHOP-I
List of experiments in workshop
Measurement shop
1. To study commonly used precision and non precision tools used in workshop.
2. To find the external diameter of the given sample using outside micrometer.
3. To find the internal diameter of the given hollow cylindrical sample using inside micrometer/ vernier caliper.
4. To compute the volume of the given wooden sample using vernier caliper.
Fitting shop
5. To study commonly used tools in the fitting shop.
6. To prepare a job in fitting shop as per the given drawing. (use of hacksaw, different files, try square etc. desired.)
7. To prepare a male female assembly as per the given drawing.
Foundry shop
8. To study commonly used tools in the foundry shop.
9. To prepare a mould using single piece pattern.
10. To prepare a mould using two pieces split pattern.
11. To study/ prepare the gating system in the green sand mould.
Carpentry shop
12. To study commonly used tools in carpentry shop.
13. To prepare a T- lap joint from the given wooden stock.
14. To prepare a mortise and ten on joint from the given wooden stock.
Smithy and forging shop
15. To study commonly use tools in the smithy shop.
16. To study the hearth.
17. To prepare a screw driver from given mild steel rod.
SECOND YEAR
MECHANICS OF SOLIDS
First Term
1. Introduction and Fundamental Concepts:Introduction- purpose and scope of the subject, Generalized procedure, Basic assumptions, Types of forces (External and Internal forces), Method of sections, Constitutive law, Elastic material principle of Superposition, Sir vinant,s principle, Tensile test, Generalized Hooke’s law for isotropic and elastic material. 5 lectures.
2. Simple Stress and Strain: Uniaxial tension or compression of a bar (prismatic and non prismatic), Cases of simple shear strain components in terms of shear stress, Biaxial and tri-axial tension or compression, Thermal stress and strain, Statically determinate system of bars in tension (or compression), Thin wall pressure vessels, Cylindrical and spherical shells. 8 lectures
3. Shearing force and Bending Moment:Use of singularly functions in drawing B.M.D. and S.F.D. 6 lectures
4. Stress due to Bending:Pure bending of beams, Normal stress and shear stress distribution in a beam subjected to both BM and SF. 6 lectures
Second Term
1. Deflection due to Bending: Double integration method, Moment area method. 4 lectures
2. Torsion:Torsion of a solid and hollow circular shaft, Torsion of a hollow thin walled shaft, Closed coiled helical spring, Flanged coupling. 5 lectures
3. Two- Dimensional stress analysis:Plane stress components on general plane at a point, Mohr’s Circle of stress. 6 lectures
4. Cases of Combined Loading:Bending with tension (or compression), eccentrically loaded member, Core of section, torsion and shear, torsion and bending, Cases of Transmission shafts subjected to bending, tension of axial thrust. 6 lectures
5. Elastic Strain Energy and its Application:Elastic strain energy of a rod under various kinds of loading, Elastic strain energy for various states of stress, Simple application, Castgliano Theorem. 4 lectures
Laboratory Work
Minimum eight experiments based on the theory covered under the subject.
Books Recommended
1. Mechanics of Solids – Khurmi
2. Mechanics of Solids – Singh & Jha
3. Strength of Materials – Ryder
Reference Books
1. Mechanics of Solids – Timosheinko & Gare
2. Introduction to Mechanics of Solids – Grandall & Dahl
3. Mechanics of Solids – Popov
4. Strength of Materials – R. S. Khurmi
THERMODYNAMICS-1
First Term
1. SOURCES OF ENERGY: Solar Fossil, Nuclear, Geothermal, Wind, Tidal and Bio-mass energy, Basic principle of energy conservation, Direct and indirect energy conservation methods. 5 lectures
2. BASIC CONCEPT:Dimension and units, thermodynamic system and their properties, Zeroth law and temperature equilibrium concepts. 3 lectures
3. FIRST LAW OF THERMODYNAMICS: Concept of work and heat, First law applied to open and closed system, Internal energy and enthalpy, flow work, examples, gasses, vapours, Laws of perfect gas, Specific heat at constant pressure and constant volume, PVT relation. 8 lectures
4. PVT SURFACE OF STEAM:Properties of steam, use of steam tables, simple thermodynamics process involving gasses and vapours. 4 lectures
5. HELMHOLTZ AND GIBBS FUNCTION: Maxwell’s relation. 3 lectures
6. SECOND LAW OF THERMODYNAMICS:Introduction, Kelvin-Plank and Clausious statements and their equivalence, reversibility and irreversibility, Carnot-cycle, corollariesofsecond law, Clausious inequality and entropy as a property, principles of increase of entropy, calculation of entropy, change in ideal gas process.
Second term
1. IDEAL CYCLES: Otto, Diesel, Dual and Joule cycles, comparison of efficiencies.
2. VAPOUR CYCLES: Carnot and Rankin cycle (use of Mollier chart)
3. NON REACTING MIXTURES: Mixture of ideal gases, Dalton’s law, mixture of ideal gases and vapour psychometrics, adiabatic saturation temperature, DBT and WBT, humidity, degree of saturations, use of psychometric chart, processing including air-vapour mixture, vapour cooling.
4. COMBUSTION: Combustion process , stoichiometric reaction equation, mass balance, complete and incomplete combustion, analysis, enthalpy and internal energy of reaction , enthalpy of formation , flue gas analysis , Orsat apparatus, higher and lower heating values of fuels.
5. FUEL CELLS: Solar cells and solar collectors M.H.D. conversions.
BOOKS RECOMMENDED:
1. Engineering thermodynamics, by R. F. Balzinger and M. R. Samuels.
2. Thermodynamics , by R Prasad and B.K Singh
3. Thermodynamics , by Reynolds
WORKSHOP-II
1. MACHINE SHOP: Exercise in plane turning, taper turning, thread cutting of the rods between the centers, mounting on the face plate and machining.
2. WELDING: arc welding a bead on the flat plate, exercise in butt or lap joint, edge preparation.
3. SHEET METAL SHOP: Cutting of a sheet to a desired shape and develop a desired solid shape.Sheet metal strips to be roll bent and gas welded, making of utility articles with sheet metal or thin wires formed to shape and welded.
4. CHUCKING WORK: using a four jaw chuck , turning an eccentric shape using a self centering chuck, internal and external cutting, knurling, turning and tapering matched cylindrical jobs for a clearance fit.
5. ELECTRICAL SHOP: House wiring with neutral arrangement.
BOOKS RECOMMENDED
1. Workshop technology by, Hajra and Choudhary
2. Workshop technology by, B S Raghuvanshi
3. Workshop technology by, O P Khanna
LABORATORIES
WORKSHOP-II
1. To make a step turning job in the machine shop of the given on the mild steel round bar.
2. To make a taper turning job in the machine shop of the given on the mild steel round bar.
3. To make the cylinder by the use of seam joint of aluminum alloy steel of the given dimension in the steel metal shop.
4. To make a lap joint of the given dimension with the Electric Arc welding shop on the given mild steel job piece.
5. To do the various operation such as cutting ,filling, drilling and tapping etc .on the prepared earlier in the first job.
6. To prepare the single & double seam joint with the Aluminum alloy steel of the given dimension in the steel metal shop.
7. To make a butt joint of the given dimension with the Electric Arc welding shop on the given mild steel job piece.
MATERIAL TESTING LABORATORY:
1. Strength Testing of a given Mild Steel Specimen on UTM with full detail σ-є plot on the machine
2. Other Test such as Shear Test, Bend Test on UTM.
3. Impact Strength test on Impact testing Machine like Charpy, Izod or Both.
4. Hardness testing of a given Specimen using by Rockwell and Vicker’s /Brinell Testing machine.
5. To Determine Modulus of Rigidity of a Bar on Torsion testing machine.
ELEMENTS OF MECHANICAL ENGINEERING LABORATORY
1. To study and sketch the Fire tube boiler(Lancashire boiler)
2. To study and sketch the Water tube boiler(Babcock & Wilcoxboiler)
3. To study and sketch the Two stroke petrol engine.
4. To study and sketch the Four stroke petrol engine.
5. To study and sketch the Four stroke diesel engine.
6. To study and sketch the Steam engine model.
TOOLS AND EQUIPMENTS LIST AVAILABLE IN DIFFERENT LABORATOTRIES
Laboratory Equipment List
Workshop lab items
Sl. No. Items
1 Tannen Saw
2 Diamond Dresser
3 Wooden Mallet
4 Firmer Chisel 3/4"
5 Firmer Chisel 1"
6 Firmer Chisel 1 1/2"
7 Firmer Chisel 1/2"
8 Mortise Chisel 1/4"
9 Mortise Chisel 5/16"
10 Mortise Chisel 3/8"
11 Mortise Chisel 1/2"
12 Bevel Square 6"
13 Steel Foot Rule 12"
14 Steel Tape 3 Mtr.
15 Clue Hammer
16 Drill Machine
17 Pincer 7"
18 Pincer 8"
19 Screw Driver 12"
20 Screw Driver 10"
21 Saw Setter
22 Tri Square 8"
23 Clamps 6"
24 Clamps 4 "
25 Jack Plane : 5
26 Smoothing Plane Wooden
27 Marking Gauge AI
28 Hand Drill Machine 1/4"
29 Bench Grinder with Wheels
30 Compass 6 "
31 Compass 6" Outside
32 Divider 6"
33 Wing Compass 12"
34 Drill BSW (Different Size) 29 Sets
35 Tap & Die (BSW) (5 Sets)
36 Tap Handle (1/2 & 3/4)
37 Die Handle (1" & 1 1/2")
38 Tap & Die (BA) (3 Sets)
39 Allen Key Set (mm+inch)
40 Hand Hacksaw Frame Adjustable12"
41 Hand Hacksaw Frame Fix 12"
42 Oil Can
43 Steel Tap 5 Meter
44 Tri Square 6"
45 Pipe vice 2"
46 Number Set 1/2"
47 Letter Set 1/8"
48 Universal Surface Gauge
49 Bench Vice 6"
50 Needle File Set
51 Angle Plate 100x100x100
52 D/E Spanner Set 12x12 Ring (mm+inch)
53 Centre Punch
54 Round File 6"
55 Square File 10"
56 Square File 8"
57 Flat file bastard 10" single cut
58 Triangular File 6"
59 Haif Round File 6"
60 Haif Round File 8"
61 Haif Round File 10"
62 Flat Chisel
63 Nose Plier 6"
64 C Clamp 6"
65 Plier 8"
66 Spring Divider 6 "
67 Outside Caliper 6"
68 Inside Caliper 6"
69 Screw Driver
70 Drill Machine
71 Ball Pen Hammer
72 Flatter 2"x2"
73 Hot Chisel with Handle
74 Open Hearth Furnace
75 Flat Chisel
76 Shovel
77 Hacksaw Frame
78 Cross Pan Hammer 2 lbs
79 Crow Tong
80 Side Tong
81 Hollow Tong
82 Flat tong
83 M.S. Fork
84 Hand Gloves (Pair)
85 Sledge Hammer 5 Kg.
86 Hand Blower
87 Helmet
88 Claw Hammer 1.5 lbs
89 Flat Bastard file 12 "
90 Flat Bastard file 10 "
91 Haif Round File 10"
92 Tri Square 8"
93 Vernier Caliper 300mm
94 Vernier Caliper 150mm
95 Micrometer 0-25 Outside
96 Micrometer 25-50 Outside
97 Vernier Height Gauge
98 Micrometer 5-30 Inside
99 Depth Micrometer 0-25
100 Bore Gauge 10-18 mm
101 Dial Indicator with Magnetic Stand
102 Combination Set 300mm Scale Set
104 Bench Vice 6"
105 Carpenter Vice 8" -- 200mm
106 Hand Vice No. 5
107 Jack Plane : 5
ENGINEERING MECHANICS LAB
1 Bending Moment Apparatus
2 Bending of Moment Apparatus
3 Polygon of forces Apparatus
4 Combined Coil & Flat Belt (pulley App)
5 Friction Slide Apparatus
6 Worm and Worm Wheel Apparatus
7 Screw Jack
8 Winch Crab Single Purchase
9 Compression & Expnasion of Spring App
10 Moment of Inertial Apparatus (flywheel)
11 Inclined Plane Apparatus
12 Weights Set

This page was last updated by Eralokkumar on Sat, 21 August , 2010 10:46:19 GMT

Saturday 28 March 2009

http://usefullinksforengineer.blogspot.com/



http://eralokkumar.blogspot.com/
For session 2009-10
( Notice for admission)
M.Tech ( Heat Power Engineering)

Subjects in M.Tech ( BIT Sindri ):
2 Years Full-Time Programme

Ist Semester


Advance Mathematics
Numerical Method of Computational Techniques
Material Science
Optimization & Techniques
Instrumentation & Control

IInd Semester

Advance Refrigeration
Advance Air conditioning
Advance Thermodynamics
Heat Mass Transfer
Solar Energy

IIIrd & IVth Semester

Project Work


HEAT POWER LAB

1. Fair banks – Morse engine with test bench – 8 HP/700 rpm.
2. C.F.R. Engine
3. Flue gas analyzer with indimeter
4. Kirlosker Double cylinder diesel engine – 10 BHP/1600 rpm.
5. Wankel Engine
6. Tex tool Diesel Engine BHP8/10, RPM 650/800
7. Perkins Multi cylinder Engine
8. Ford Engine
9. Crosslay Gas Engine with producer gas plant
10. Gas turbine (Rover)
11. Revotherm Fire tube boiler
12. Multistage reaction steam turbine
13. Steam engine (Compound)
14. Working models of Boilers and I.C. engine systems.
15. Air conditioning plant

NON - CONVENTIONAL ENERGY LAB

1. Pyranometers (Black and White)
2. Mechanical Pyranograph
3. Solarimeter
4. Sun duration meter
5. Total radiation measuring instrument
6. Solar Tracker
7. Wind measuring device
8. Flat plate collector
9. Solar photo-voltaic modulate with monoblack pump
10. Bio-gas plant.

HEAT TRANSFER LABORATORY

1. Free convection Test Rig
2. Forced convection Test Rig
3. Emissivity apparatus
4. Thermal conductivity Test Rig
5. Boiling and condensation Test Rig
6. Shell & Heat Exchanger
7. Refrigeration Test Rig
8. Air -conditioning Test Rig
9. Radiation Test Rig




Academic Calendar for the session 2008-09

1st Semester

1. Teaching : 25.08.08 to 01.10.08
2. Mid Semester Examination : 10.11.08 to 15.11.08
3. Teaching : 17.11.08 to 19.12.08
4. Form Filling 23.12.08 to 27.12.08
5. Viva Voce 05.01.09 to 10.01.09
6. Semester Examination : 15.01.09 to 25.01.09
7. Semester Break : 26.01.09 to 31.01.09

3rd & 5th Semester

1. Teaching : 11.08.08 to 01.10.08
2. Mid Semester Examination : 10.11.08 to 15.11.08
3. Teaching : 17.11.08 to 19.12.08
4. Form Filling : 23.12.08 to 27.12.08
5. Viva Voce : 05.01.09 to 10.01.09
6. Semester Examination :15.01.09 to 25.01.09
7. Semester Break : 26.01.09 to 31.01.09


4th Year

1. Teaching : 14.07.08 to 01.10.08
2. 1st Terminal Examination : 10.11.09 to 18.11.08
3. Teaching : 19.11.08 to 2nd week of March 2009
4. 2nd Terminal Examination : 3rd week of March 2009
5. Form Filling & Viva Voce : Up to 2nd week of April 2009
6.University Exam : 3rd week of April 2009


List of Holidays and Vacations in the Year 2009

01. Makar Sankranti : 14 January, Monday
02. Muharram : 19 January, Saturday
03. Netaji Subhash Jayanti : 23 January, Wednesday
04. Republic Day : 26 January, Saturday
05. Guru Ravidas Jayanti : 21 February, Thursday
06. Maha Shivratri : 06 March, Thursday

07. Holi / Birthday of Paigambar Mohammad / Good Friday :20 March, Thursday To 25 March, Tuesday

08. Sarhul : 08 April, Tuesday
09. Ram Navami / Ambedkar Jayanti : 14 April, Monday
10. Mahavir Jayanti : 18 April, Friday
11. Veer Kunwar Singh Jayanti : 23 April, Wednesday
12. Labour Day : 01 May, Thursday

13. Summer Vacation, including Buddha Purnima, Hul Diwas : 19 May, Monday To 12 July, Saturday

14. Independence Day :15 August, Friday
15. Karma Puja : 11 September, Thursday

16. Puja Vacation, including Gandhi Jayanti, Durga Puja, Diwali, Chhath : 02 October, Thursday To 08 November, Saturday

17. Guru Nanak Jayanti : 13 November, Thursday
18. Bakarid : 08 December, Monday To 09 December, Tuesday

19. Winter Vacation, including Christmas : 22 December, Monday To 31 December, Wednesday





no permission is granted for reproduction in any manner.


No permission is granted for reproduction in any manner.


PTU/BOS/ME/201/27-07-2004
1
TEACHING SCHEDULE & STUDY SCHEME
M. TECH. PROGRAMME
(Mechanical Engineering Machine Design)
PUNJAB TECHNICAL UNIVERSITY, JALANDHAR
August, 2004
PTU/BOS/ME/201/27-07-2004
2
DETAILED SYLLABUS AND OTHER CONDITIONS FOR THE
PROPOSED COURSE
M.TECH. MECHANICAL ENGINEERING –MACHINE DESIGN
Schedule of Teaching Schedule of Examination
Lecture Tutorials Total Time Theory Sessional Viva Total
(per week) (Hrs.) Marks Marks
4 0 4 All theory subjects 3 100 50 150
Project 50 50 100
Seminar 100 100
Dissertation Satisfactory/not Satisfactory
SEMESTER-I
MEM-501 Advanced Engineering Mathematics
MEM-502 Advanced Material Science
MEM-503 Advanced Mechanics of Solids
MEM-504 Vibration Analysis
MEM-505 Optimization Techniques
MEM-506 Lab-I
SEMESTER-II
MEM-507 Finite Element Method in Design
MEM-508 Computer Aided Machine Design
MEM-509 Industrial Tribology
MEM- Elective-I
MEM- Elective-II
MEM-516 Lab -II
SEMESTER-III
MEM- Elective-III
MEM- Elective-IV
MEM-580 Project
MEM-590 Seminar
SEMESTER-IV
MEM-500 Dissertation
LIST OF ELECTIVES
ELECTIVE-I
MEM-510 Mechtronics
MEM-511 Machine Tool Design
MEM-512 Automotive Design
ELECTIVE-II
MEM-513 System Design
MEM-514 Design of Experiments
MEM-515 Robotics Engineering
ELECTIVE-III
MEM-517 Design of Machine Frames & Housings
MEM-518 Product Design & Development
MEM-519 Computational Numerical Techniques
MEM-520
ELECTIVE-IV
MEM-521 Modelling & Simulation
MEM-522 Composite Materials
MEM-523 Engineering Fracture Mechanics
PTU/BOS/ME/201/27-07-2004
3
MEM 501 APPLIED ENGINEERING MATHEMATICS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to
be set. The candidates will be required to attempt any five questions
1. FOURIER TRANSFORMS: Introduction, Fourier Integral Theorem, Fourier Sine and
Cosine Integral, Complex form of Fourier Integrals, Fourier Transforms, Inverse Fourier
Transform, Properties, Modulation Theorem, Convolution Theorem for Fourier
Transforms, Parseval’s Identity, Fourier Transforms of derivative of functions, Relation
between Fourier and Laplace transform.
2. MATRICES AND LINEAR SYSTEM OF EQUATIONS: Solution of linear
simultaneous equations by Gaussian elimination and its modification, Crout’s
triangularization method, Iterative methods-Jacobi`s method, Gauss-Siedel method,
Determination of eigen values by iteration.
3. CONFORMAL MAPPING: Conformal mapping, Linear transformations, Bi-linear
transformations, Schwarz’s-Christoffel transformations.
4. TENSOR ANALYSIS: Introduction, Curvilinear co-ordinates, Summation convention,
Transformation of coordinates, ,Contravarient and Covariant vectors, Tensor of order
zero, Tensor of higher order ,Symmetric and Skew symmetric Tensors, Algebra of
Tensors, Riemannian space .Line element and Metric Tensor, Conjugate Tensor,
Associated Tensor,Physical components,Christoffel symbols, Covariant differentiation of
Covariant and Contravarient Tensors.
Books Recommended
1. Higher Engineering Mathematics by Dr. B.S. Grewal; Khanna Publishers
2. Fourier Series and Boundary Values Problems by Churchill; McGraw Hill.
3. Complex Variables & Applications by Churchill; McGraw Hill.
4. The Use of Integral Transforms by I.N. Sneddon., Tata McGraw Hill.
5. Vector Analysis By Murry Spegiel ; S. Series
PTU/BOS/ME/201/27-07-2004
4
MEM 502 ADVANCED MATERIAL SCIENCE
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Plastic Deformation of Single Crystals- Concept of crystal geometry, Lattice defects,
Deformation by slip, slip in a perfect lattice, slip by dislocation movement, critical
resolved shear stress for slip, deformation of single crystal, deformation of face centered
cubic crystals, deformation by twinning, stacking faults, deformation bands and kink
bands, micro strain behaviour, strain hardening of single crystal
Dislocation Theory- Introduction, observation of dislocation, Berger’s vector and
dislocation loop, dislocations in face centered cubic lattice, dislocations in hexagonal
close packed lattice, dislocation in the body centered cubic lattice, stress fields and
energies of dislocations, dislocation climb, intersection of dislocation Jogs, dislocation
sources, multiplication of dislocations, dislocation point defect interactions, dislocation
pile up.
Strengthening Mechanisms- Grain boundaries and deformation strengthening from grain
boundaries, low angle grain boundaries, yield point, phenomenon of strain aging, solid
solution hardening, deformation of two phase aggregates, strengthening from fine
particles, strengthening due to point defects. Martensite strengthening, cold worked
structure, strain hardening, annealing of cold worked metal, Bauschinger effect, preferred
orientation
Mechanical Behaviour of Polymeric Materials- Introduction, time dependent mechanical
behaviour of polymeric materials, structure of polymers, deformation of polymers,
yielding criteria for polymers, Rheology, viscoelastic behaviour, rubber elasticity,
fracture and toughness
Fundamental of Metalworking- Mechanics of Metalworking, Flow stress determination,
strain rate effects, deformation zone geometry, workability, residual stresses
Books Recommended
1. Fundamentals of Material Science and Engineering- William F Smith
2. Mechanical Metallurgy- Dieter
3. Physical Metallurgy- Reedhill
4. Physical Metallurgy- Van Vlack
5. Physical Metallurgy and Heat Treatment – Lakhtin
6. Physical Metallurgy Avner
7. Theory of Dislocations Hull
PTU/BOS/ME/201/27-07-2004
5
MEM 503 ADVANCED MECHANICS OF SOLIDS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, to be
set. The candidates will be required to attempt any five questions.
1. Analysis of stresses and strains in Cartesian and Polar coordinates. Stress
transformations, Strain transformations, Generalized Stress- Strain Relations
and Compatibility Conditions.
2. Fundamental laws of Elasticity and Plasticity, Generalised plane stress and
plane strain relations, The Airy’s Stress Function, Prandtl’s Stress function for
torsion, St. Venant's principle.
3. Elastic strain energy and external Work, Virtual work Methods, Elastic energy
methods, Castigliano’s Theorems and Statically Indeterminate Systems.
4. Stress Concentration: Stress concentration Factors, Theory of elasticity,
Combined loads , Experimental techniques and Effective Stress concentration
Factors. Contact Stresses: Method of Computing Contact stresses,
Computation of Contact Stresses of two bodies in line contacts.
5. Solution to Boundary Value Problems for prismatic sections, Torsion of
Prismatic sections, Membrane analogy for thin walled and multiple connected
sections.
6. Beams on elastic foundations: General Theory, Infinite Beam Subjected to a
concentrated; Boundary Conditions. Infinite Beam Subjected to a distributed
load segment. Semi infinite beams subjected to loads at its ends. Short Beams.
7. Introduction to strain gauges; General, configurations, Instrumentation and
Characteristics of Strain Gauge Measurements. Theory of Photoelasticity and
techniques used in Photoelastic Applications.
Books Recommended:
1. Advanced Mechanics of Materials, A.P.Boresi, R.J. Schmidt, O.M.
Sidebottom ,
John Wiley & Sons, 1993.
2. Advanced Strength and Applied Stress Analysis, Budynas, R .,1988.
McGraw-Hill.
3. Contact Mechanics, K.L.Johnson, Cambridge University Press.
4. Theory of Elasticity, S.P.Timoshenko and J. N. Goodier, McGraw-Hill.
PTU/BOS/ME/201/27-07-2004
6
MEM 504 VIBRATION ANALYSIS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Fundamentals of Vibrations- Introduction of Vibrations, Classification, Mathematical
Modeling of Physical Systems & Dimensional analysis, Elements of vibrating systems,
equivalent springs, Static equilibrium position, Inertia effects, viscous dampers,
Equivalent systems.
Free Vibrations-Classification of free vibrations, Free vibrations of single degree of
freedom systems & multi degree of freedom systems, application of Newton’s Laws and
energy methods to normal mode solution, natural frequencies & mode shapes, natural
frequencies using flexible matrix, determination of natural frequencies by Matrix
Iteration, Rayleigh Quotient, Duhamel’s integral.
Transient Vibrations-Non-periodic excitation, derivation of Convolution Integral,
Excitations whose form change with time, transient motion due to base excitation,
Laplace transform solutions, shock spectrum, numerical methods for excitation.
Forced & Damped Vibrations-Harmonic excitation, Bending critical speeds of simple
shafts, Method of Laplace transform, parametric excitation, Damping Models-viscous
damping, structural damping, coulomb damping, single degree of freedom system with
viscous damping, over damped system, critically damped system, under damped system,
Logrithmic Decrement, Duhamel’s integral, Negative damping-self excited vibrations.
Vibrations of Continuous Systems- Torsional oscillations of a circular shaft, vibrations
of finite beam, Vibrations of beams of variable cross section, vibrations of plates &
rings, Forced vibrations of beams.
Non-Linear Vibrations- Sources of non-linearity, free undamped vibrations with
nonlinear restoring force, forced undamped vibrations with nonlinear restoring force, self
excited vibrations & stability.
vibration Control- Basic concepts of vibration isolation, vibration isolation theory,
vibration control by balancing, damping and damping treatment, practical aspects of
vibration isolation, Dynamic vibration absorbers, damped vibration absorbers.
Books Recommended
1. Vibration Problems in Engg. By John Wiley & Sons.
2. Fundamentals of Mechanical Vibrations by W. Weaver and D.H. Young.
3. Mechanical Vibration Analysis By P. Srinivasan.
4. Non-Linear Mechanical Vibrations By P. Srinivasan.
5. Fundamentals of Mechanical Vibrations By S. Graham Kelly.
6. Theory and Problems of Mechanical Vibrations By William W. Seto.
PTU/BOS/ME/201/27-07-2004
7
MEM 505 OPTIMIZATION TECHNIQUES
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
1. Linear Programming: Two phase method, Revised simplex method and dual
simplex method. Sensitivity analysis. The dual problem and its role for post
optimality analysis.
2. Dynamic Optimization Models: Formulation of dynamic optimization models for
common industrial problems. Optimization of non-linear objective function by
dynamic programming.
3. Nonlinear optimization models: Nonlinear objective queuing function of
unconstrained variables, quadratic programming.
4. Queueing Models: Queuing with single and parallel channels with limited and
unlimited service. Bulk input, bulk service, priority queue discipline.
5. Heuristic Models Need for heuristic programming, examples of heuristic models
for traveling salesman problems, facilities design and assembly line balancing.
6. Optimization Techniques: Introduction, Theory and algorithms, classical method,
non-linear optimization- Unconstrained optimization, constrained optimization:
Langrangian multiplier method
Books Recommended
1. Fundamental of Operations Research Ackoff and Saseini: Wiley Eastern
2. Principles of OR with applications to managerial decisions by Wagner: Prentice
Hall
3. Introduction to OR by Hillier & Lieberman: Holden day
4. Operations Research by D. S. Hira
PTU/BOS/ME/201/27-07-2004
8
MEM--506 Lab-I
Max. Marks: 100
Time Allowed: 2hrs
One lab /field/industrial oriented project /problem will be allocated to each
student related to the subjects related to the subjects taught in 1st semester.
ME 507 FINITE ELEMENT METHODS IN DESIGN
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
1. Introduction- Field Conditions, Boundary conditions, Approximate solutions
2. Basic Principles of structural Mechanics- Equilibrium conditions, Straindisplacement
relations, Linear constitutive relations, Principle of virtual work,
Energy principles, Application to finite element method
3. Element Properties- displacement models, Relation between the nodal degrees
of freedom and generalized coordinates, convergence requirements, Natural
coordinate systems, Shape functions (interpolation functions), element strains and
stresses, Element stiffness matrix, Static condensation
4. Isoparametric Elements- Two- dimensional Isoparametric elements,
computation of stiffness matrix for isoparametric elements, convergence
criteria for isoparametric element
5. Direct Stiffness Method of Analysis and Solution Technique- Assemblage of
elements- direct stiffness method, Gauss elimination and matrix
decomposition.
6. Analysis of Framed Structures- Two dimensional truss element, Three
dimensional truss-element, Tree dimensional beam element
7. Plane Stress and Plane Strain analysis- Triangular elements, Rectangular
elements, Isoparametric elements, Incompatible displacement models.
8. Application of FEM to Heat conduction problems.
Books Recommended
1. Finite Element Analysis- C S Krishnamoorthy
2. Finite Element Method- Desai and Abel
3. Finite element Method-Zienkiewics
4. Concepts and Applications of Finite Element analysis- Cook
5. Basic Programs in Finite Element Method- David K Brown
PTU/BOS/ME/201/27-07-2004
9
MEM 508 COMPUTER AIDED MACHINE DESIGN
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
1. Fundamentals of CAD: Introduction: Design Process: Application of computers in
design: Creating manufacturing database: benefits of CAD. Computer Hardware;
Graphic input devices; display devices; Graphics output devices; Central
processing unit (CPU)
2. CAD software and Database: Software configuration of a graphics system:
functions of a graphics package: geometric modeling: Database structure and
control;
3. Geometric Transformations: Mathematics preliminaries, matrix representation of
2 and 3 dimensional transformation: Concatenation of transformation matrices.
Application of geometric transformations.
4. Computer aided design of Transmission Belts (Flat & V) using C++/VC.
5. Computer aided design of Journal Bearing.
6. Application programs for selection of Ball and roller bearings using C++/VC
7. Computer aided design of Knuckle joint and flanged coupling using C++/VC.
8. Computer aided design & drafting of spur gears and flywheel using C++/VC.
9. Introduction to Design and Engineering Applications- geometry and mass
property formulations, design projects with CAE focus
Books Recommended
1. CAD/CAM Ibrahim Zeid
2. Principles of computer aided design- J Rooney and P Steadman
3. Computer Aided Graphical Design – Daniel L Rayan
4. Computer Graphics and Design- P Radhakrishnan and Kothandaraman
PTU/BOS/ME/201/27-07-2004
10
MEM 509 INDUSTRIAL TRIBOLOGY
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Introduction: friction, wear and lubrication, types of engineering contacts: conforming
and non conforming, Types of motion: rubbing, sliding, oscillating, rolling, surface of
interaction, elastic and plastic deformations, properties of materials, surface energy and
flash temperature theory.
Friction: Laws of sliding friction, concept of adhesion, Tabor’s model of elastic thermo
friction, rolling friction, measurement of friction
Wear: Laws of wear. types of wear such as adhesive, declamation, abrasive, corrosive,
fretting, erosive and oxidative. Measurement of wear and friction in atmosphere and
different environments, Prevention and control of wear and friction in machines, wear of
cutting tools and dies, study of abrasion in grading, lapping/ honing
Lubrication: Mechanism of lubrication, Boundary, squeeze film hydrodynamic and elasto
hydrodynamic and hydrostatic lubrication, plasto hydrodynamic lubrication, solution of
Reynolds’s equation in two and three dimensional flow, pressure distribution load
carrying capacity friction forces in oil film and coefficient of friction in journal bearing,
Solid, Liquid and Gas lubricants types and their applications
Bearing Design: Design of bearing clearance in journal bearing, minimum film thickness,
sommar field number. oil grooves and flow of oil in axial and circumferential grooves
cavitations and turbulence in oil bearings, Heat generation and cooling or bearing
hydrostatic and dynamic and their applications in machine tools, Design of air bearings
and other gas bearings
Rolling Friction: Reynold slip, Heathe cote concept selection of roller bearings and their
methods of lubrication design aspects and modes of bearing failures and elasto
hydrodynamic lubrication
Tests and Instrumentation in Tribology: Sliding friction and wear abrasion test, rolling
contact and fatigue test, solid particle and erosion test, Corrosion test
Special instruments for lubricant analysis such as optical and infrared spectroscopy and
infra red spectroscopy, atomic absorption and emission spectroscopy, mass spectroscopy,
NMR spectroscopy, X ray diffraction and chromatographic techniques, Use of
transducers and instruments in Tribology- film thickness measurement using modern
techniques – Development of test rigs for Tribology research
Books Recommended
1. Friction, Wear, Lubrication: A text book in Tribology
2. Engineering Tribology by Gwidon W Stachowiah and Gwidon W
3. Principles and Application of Tribology by Bharat Bhusan
4. Applied Tribology: Bearing Design and Lubrication by Khonsari and Booser
5. Tribology in Industries by Sushil kumar Srivastva
6. Introduction to Tribology of Bearing by BC Majumdar
PTU/BOS/ME/201/27-07-2004
11
MEM 510 MECHATRONICS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
INTRODUCTION
What is Mechatronics, Systems, Measurement Systems, Control Systems,
Microprocessor- based controllers, The Mechatronics Approach.
SENSORS & TRANSDUCERS
Sensors and Transducers, Performance Terminology, (Displacement, Position
& Proximity Sensors),(Velocity & Motion, Force, Fluid Pressure, Liquid
Flow, Liquid Level, Temperature & Light Sensors), Selection of Sensors.
ELECTRONIC FUNDAMENTALS
Signal Conditioning Process, Operational Amplifier, Digital Logic, Logic
Gates, Boolean Algebra, Data Acquisition Systems, Measurement Systems,
Testing and Calibration.
ACTUATORS
Mechanical Actuation Systems, Hydraulic & Pneumatic Actuation Systems,
Electrical Actuation Systems, A.C. Motor, D.C. Motor, Stepper Motor.
SYSTEM MODELLING & CONTROL
Mathematical Models, Engineering Systems, Electromechanical & Hydraulic-
Mechanical Systems, Modeling Dynamic Systems, Transfer Functions,
Introduction to METLAB & SIMULINK, Control Modes, PID Controller.
MICROPROCESSOR & COMPUTER
Computer and Interfacing, Microcomputer Structure, Microcontrollers,
Application of Microcontrollers, PLC.
DESIGN & MECHATRONICS
Designing, Possible Design Solutions, Case Studies of Mechatronic Systems.
Books Recommended
1. Mechatronics, W. Bolton, Pearson Education Asia
2. Analytical Robotics and Mechatronics, Wolfram Stadler, McGraw Hill
3. Mechatronics, Dan Necsulescu, Pearson Education Asia
4. Mechatronics, HMT
5. Mechatronics, AMT
6. Introduction to Digital Computer Electronics, A.P. Mahind, TMH
7. Measurement Systems, E.O. Doeblin, McGraw Hill
8. Automatic Control Systems, B.C. Kuo, Ogata, PHI
9. Understanding Electromechanical Engineering; An Introduction to Mechatronics-
Lawrence J K PHI
PTU/BOS/ME/201/27-07-2004
12
MEM 511 ADVANCED MACHINE TOOL DESIGN
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
1. Introduction, Classification of machine Tools, Elements of machine tools,
selection of speed and feed, gear box design, various types of clutch systems,
Sohopke and Report drive/s. double bound gears analysis, Lohr Criterion for
optimizing double bond gear.
2. Stepless drive, Mechanical stepless drive analysis, Hydraulic stepless drive circuit
analysis, Design features, Throttle valves, Tracer controlled hydraulic circuit,
Hydraulic servo controls, Electrical stepless drive circuits and characteristics.
3. Strength and Rigidity consideration, process capability and compliance, Design of
Lathe Bed, use of stiffness in bed, design of radial drill column and milling
machine column.
4. Analysis of spindle bearings, slides and guide, design of spindle/arbor, antifriction
and journal bearing. Hydrodynamic action in slides, analysis of hydrostatic
bearings, Roller guides, recirculating ball analysis, stick slip motion in guidesmodels,
force analysis of Lathe guide ways.
5. Vibration of machine tools and dynamic rigidity: Effect of vibrations, source of
vibrations, self excited vibration, single degree of freedom chatter, velocity
principle and related models, regenerative principles, chatter in lathe, drilling,
milling & grinding, Tlusty and palace model, Peters model, Elementation of
machine tool structures matrix. Finite elements and lumped constant models.
6. Automation: Automation drives for machine tools, Degree of automation, Semiautomation,
analysis of collect action, design of collect, bar feeding mechanism,
tooling layout, single spindle mechanism, analysis, swiss type automatic machine.
Loading and unloading. Transfer- devices, Modulator- design concept, in process
gauging.
7. Control system of machine tools: control, mechanical, electrical, hydraulic,
numeric and fluidic. Basic principle of control, hydraulic controls, fluid controls,
numerical controls, feed back systems, Primary systems programming
Books Recommended
1. Machine tools design by Mehta: Tata McGraw Hill
2. Principles of machine tools by Sen et al Central Book Agency
3. Machine Tool Design by Bassu & Pal: Oxford & IBH
4. Machine tool Design vol. i to iv by Acherken: Mir Publishers
5. Design Principles of Metal cutting machine tools: Koenigsberger: Pergamon
PTU/BOS/ME/201/27-07-2004
13
MEM 512 AUTOMOTIVE DESIGN
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Automotive Engineering Development: Innovations and Inventions, Engine
Developments, (Transmission, Steering, Suspension, Brake) system development,
Interior Refinement, Safety Design.
Modern Materials and Manufacturing Challenge: Structure, Properties and
Manufacturing technology of automotive materials, Material selection, Design to
manufacture as a single process and IPPD
Body Design: Styling process, Aerodynamics
Chassis Design & Analysis: Load case, Structural analysis by simple structural surfaces
method, Computational methods.
Crashworthiness and its Influence on Vehicle Design: Accident and injurt analysis,
Vehicle impact (General dynamics & crush characteristics), Structural collapse and its
Influence upon Safety.
Noise, Vibration and Harshness: Vibration control, Fundamentals of acoustics, Sound
measurement, General noise control Principles.
Occupant Accommodation: An Ergonomics Approach: Eight fundamental Fallacies,
Ergonomics in the automotive industry, Strategies for improving occupant
accommodation and comfort.
Suspension System and Components: Factors effecting design, Mobility of suspension
mechanisms, Kinematic analysis, Roll center analysis, Force analysis, Vehicle ride
analysis, Controllable suspensions.
The design of engine Characteristics for Vehicle Use
Transmissions and Driveline: Manual gearbox, Automatic transmission, Continuously
variable transmission.
Braking Systems: Fundamentals of braking, Brake proportioning and adhesion
utilization, Materials design.
Control Systems in Automobiles: Automotive application of sensors, EMS, Electronic
Transmission control, Integration of EMS and TCS, Chassis control system, Multiplex
wiring system, Vehicle safety and security system, On-board navigation system.
Failure Prevention: Important aspects of failures in real engineering world, Testing and
Failure prediction, Automotive technology and the importance of avoiding failures.
Future Trends in Automobile Design: Mechanical possibilities, Electronic and
Electrical Possibilities.
Books Recommended
1. An Introduction to Modern Vehicle Design, Julian Happian-Smith, Butterworth
2. Advanced Vehicle Technology, Heisler, ISBN
3. Automobile Design: Twelve Great Designers and Their Work, R. and Harding,
SAE
4. Road Vehicle Aerodynamic Design, Barnard, R. H., Longman
5. Manufacturing Processes for Engineering Materials, Kalpakjikan, S. Addison-Wesley
6. Automotive Ergonomics, Peacock, B. and Karwowski, Taylor & Francis
7. Automotive Sensory Systems, Nwagboso, C.O., Chapman and Hall,
PTU/BOS/ME/201/27-07-2004
14
MEM 513 SYSTEMS DESIGN
System Theory and Concepts. Engineering and engineering profession; Engineer,
Science and Scientist. Engineering and society, new challenges of engineering. Social
responsibility and engineering. Design, designer, qualities in a designer. System, its
characteristics and system design
Design cycle and its logic. Divergence, transformation and convergence, Feasibility
study, Engineering analysis. Information and information resources. Procedure to obtain
information and information handling.
Inventiveness, features and steps of inventiveness, obstacles and aids to creativity.
Estimation and bidding. Checking, methods of checking.
Optimization, optimal solution, methods of optimization. Decision making and its
requirements. Methods for decision making, preliminary design, finding alternatives.
Reliability analysis.
Modeling, advantages and limitations of modeling, types of models and their description.
Detailed design and factors affecting detailed design. Steps in detailed Design.
Production drawings. Revision. Report writing.
Case studies to be discussed involving Systems Design process
Note:
1. One compulsory question carrying about 40 percent marks on Case Study is to be
asked
2. The students may be asked to attempt another three questions of 20 marks each.
Books Recommended
1. An introduction to System Design by Dixon
2. Systems Design by D. K. Aggarwal and S.L. Singla
PTU/BOS/ME/201/27-07-2004
15
MEM 514 DESIGN OF EXPERIMENTS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
INTRODUCTION
Strategy of experimentation, Some typical applications of experimental design, Basic
principles, Guidelines for designing experiments, A brief history of statistical design,
Using statistical design in experimentation.
SIMPLE COMPARATIVE EXPERIMENTS
Introduction, Basic statistical concepts, Sampling and sampling Distribution, Inferences
about the Differences in means, randomized designs, Inferences about the Differences in
means, Paired comparison Designs, Inferences about the Variances of Normal
Distributions.
RANDOMIZED BLOCK DESIGNS
Randomized complete block design, Latin square design, Balanced incomplete block
design.
INTRODUCTION TO FACTORIAL DESIGN
Basic definition and principles, Advantages of factorials, The two factor factorial design,
General factorial design, Fitting response curves and surfaces, Blocking in a factorial
design.
FITTING REGRESSION MODELS
Introduction, Linear regression models, Estimate of parameters in linear regression
models, Hypothesis testing in multiple regression, Confidence intervals in multiple
regression, Prediction of new response observations, Regression model diagnostics,
testing for lack of fit
TAGUCHI METHOD OF DESIGN OF EXPERIMENTS
Concept design, Parameter design, Tolerance design, Quality loss function, Signal-to-
Noise ratio, Orthogonal array experiments, Analysis of Mean(ANOM), Quality
characteristics, Selection and testing of noise factors, Selection of control factors,
Parameter optimization experiment, Parameter design case study.
ANALYSIS OF VARIANCE (ANOVA)
Introduction, Example of ANOVA process, Degrees of freedom, Error variance and
pooling, Error variance and application, Error variance and utilizing empty columns, the
F-test.
Books Recommended
1. Design and Analysis of Experiments, Douglas C Montgomery, John Wiley
2. Statistical Design and Analysis of Experiments, John P.W.M., Macmillan,
3. Introduction to Linear Regression Analysis, Montgomery D.C., Runger G. C.,
4. Response Surface Methodology: Process Ang Product Optimisation Using
Designed Experiments, Myres R.H., Montgomery D. C., Wiley, New York
5. Introduction to Quality Engineering, Taguchi, G., Asian Productivity
Organisation, UNIPUB, White Plains, New York
6. System of Experimental Design: Engineering Methods to Optimize Quality and
Minimize Cost, Taguchi, G. UNIPUB, White Plains, New York
7. Statistical Analysis for Engineers And Scientists, J. Wesley Barnes, McGraw Hill
Inc.
PTU/BOS/ME/201/27-07-2004
16
MEM 515 ROBOTICS ENGINEERING
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
INTRODUCTION Definition of a Robot, Difference between hard automation and
robotic automation, Characteristics of a robot, Need for robots and their benefits,
Economic aspects in robotic application, Robot classification and their applications,
Robot generations
ROBOT IN WORK PLACE
Nee for interfacing, Part feeding, Orienting devices, Special fixtures, Conveyor belts,
Overhead transport, Work cell organization in robotic environment, Work cell design and
control.
REPRESENTATION OF A ROBOT
Functional and graphical representation of a robot, Arm structures in use, Structure of
end effectors, Degrees of freedom of a rigid body, Degrees of freedom of a robot,
Degrees of freedom and mobility.
ROBOT TECHNOLOGY
Robot anatomy and functional units, Work volume, Elements and types of drive and
control systems, Precision of movement, Actuators , Power transmission systems,
Manipulator kinematics and path control, Configuration of a robot controller.
TYPES OF GRIPPERS
Mechanical grippers, Consideration in gripper selection and design.
ROBOT SENSORS
Tactile, Proximity and Range sensors in robots, Velocity sensors, Robot vision,
Introduction to motion planning and image processing.
METHODS OF ROBOT PROGRAMMING
Robot programming languages, Introduction to intelligent robots.
ROBOT APPLICATIONS IN INDUSTRIES
Material handling and processing, Metal cutting processes, Welding, Spray coating,
Inspection, Assembly and hazardous operating conditions, Safety in robotics, Social and
labour issues in robotics, Metal handling using AGV’s, Automated storage systems using
mobile robots, Issues in implementation of robotics in industry.
LABORATORY WORK
Exercises in programming of robots, Exercises in design and layout of robot workplace,
Exercises in programming of mobile robots using simple mobile robot kits, Exercise in
robot sensors, Vision and image processing using simple robot kits.
Books Recommended
1. Industrial Robotics: Technology, Programming and Applications, Groover,
Weiss, Nagal and Odrey, McGraw Hill, New York.
2. Robotics: Control, Sensing, Vision and Intelligence, Lee, Fu & Gangalase,
3. Robotic Engineering: An Integrated Approach, Klafter, Chmielewski & Negui
4. Robotics for Engineers, Y. Koren, McGraw Hill, New York.
5. Introduction to Robot Technology, Coiffet and Chirouze, McGraw Hill
6. Robotics And flexible Automation, S.R.Deb, Tata McGraw Hill, New Delhi.
7. Fundamentals of Robotics Analysis and Control, Robot J. Schilling, PHI
8. Introduction to Robotics, J.J.Craig, Pearson Education Asia.
PTU/BOS/ME/201/27-07-2004
17
MEM 517 DESIGN OF MACHINE FRAMES AND HOUSINGS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Purposes of housing, Design of housing observing various factors such as thickness of the
casting, clearance inside of housing for all moving parts, suitable floor flanges, suitable
stiffening ribs on the housing walls, provision for eye bolt, arrangements for oil drain out
and oil level indicator, housings for reduction gears, chains and bearings, supports and
Retainment of parts.
Classification of machine frames on the basis of purpose, form, presence of parting line.
Choice of optimum form of cross section. Design of C clamp, frame of screw clamp,
frame of punch press and shearing machine. Materials for beds, bases and columns,
Typical construction of beds, ;bases and columns. Design of machine tool columns,
roaming, tables, cross rails and carriages. Modern machine tool bed design. Design of
frames for static and dynamic stiffness.
Criteria for requirements on stiffness, deformation of frames caused by weight forces,
cutting forces and forced vibrations
Books Recommended
1. Machine structures vol. 1 J Tlusty F. Koenigsberger
2. Machine tool Design vol. 3 N. Acherkan et al
PTU/BOS/ME/201/27-07-2004
18
MEM--516 Lab-II
Max. Marks: 100
Time Allowed: 2hrs
One lab /field/industrial oriented project /problem will be allocated to each student
related to the subjects related to the subjects taught in 2nd semester.
ME 518 PRODUCT DESIGN AND DEVELOPMENT
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Introduction: to Product Design: Design by Evolution and Innovation, Essential factors
of product design, Production consumption cycle, Flow and value addition in Production
consumption cycle, The Morphology of Design, Primary design phases and flowcharting,
Role of Allowances, process capability and tolerances in detailed design and assembly
Product Design and Industry: The Designer- his role, myth and reality, the industrial
design organization, basic design considerations, Role of Aesthetics in product design,
Functional design practice
Design for Production: Producibility Requirements in the design of machine components,
Forging design, Pressed component design, Casting design for economical molding,
eliminating defects and features to aid handling, Design for machining ease, the role of
process Engineer, Ease of location and Clamping, Some additional aspects of production
design, Design of powder metallurgical parts
Economic Factors Influencing Design: Product value, Design for safety, reliability and
Environmental considerations, Manufacturing operations in relation to design, Economic
analysis, profit and competitiveness, break even analysis, Economics of a new product
design (Samuel Eilon Model)
Value Engineering and Product Design: Introduction, Historical perspective, Value,
Nature and measurement of value, Maximum value, Normal degree of value, Importance
of value, The value Analysis Job Plan, Creativity, Steps to problem solving and value
analysis, Value Engg. Idea generation check list, Cost reduction , materials and process
selection in value engineering
Modern Approaches to product Design: Concurrent Design, Quality Function
Deployment, reverse engineering,
Rapid Prototyping: Stereo lithography, Solid ground cutting, Selective laser sintering,
Laminated object manufacturing, data transfer to RPT, Constraints on the Model, RPT in
manufacturing, tooling, RPT in Industrial Design, Medical applications verses
conventional technologies
Books Recommended
1. Product Design and Development by Kail T Ulrich and Steven D Eppinger
2. Product Design and Development by AK Chitale and Gupta
3. Design of Systems and Devices by Middendorf Marcel Dekker
PTU/BOS/ME/201/27-07-2004
19
MEM 519 COMPUTATIONAL NUMERICAL TECHNIQUES
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Errors in Numerical Calculation:
Introduction, Numbers and their accuracy, errors, Absolute, Relative and percentage
errors and their analysis. General error Formula
Interpolation:
Finite differences, forward differences, Backward difference, Central Difference,
Symbolic Relations, Difference of a Polynomial, Newton’s Formulae for interpolation,
Central Difference, Stirling Formula, Bessel’s Formula, Gauss Central Difference
Formulae , Everett’s Formula, Interpolation with unevenly spaced points: Lagrange’s ,
Interpolation Formula , Hermite Interpolation , Newton’s General Interpolation Formula
Numerical Differentiation, Numerical Integration, Trapezoidal rule, Simpson’s Rule,
Gaussian quadrature,
Numerical Solution of Ordinary differential equations: Initial value problems, Singlestep
methods. Runga-Kutta Methods, Multisteps Methods, Predictor Corrector Methods.
Adams- Bashforth Method. Milne’s methods, Simultaneous and Higher order equations,
Two-point boundary value problems.
Numerical solution of partial differential equations, Finite-difference
approximation to derivatives, Solution of Laplace equation by Jacobi’s Methods.
Finite element method, Weighted Residual Method, Variational Methods. Finite
elements, Application to boundary value problems
Books Recommended:
1. Elementary Numerical Analysis – S.D Conte. McGraw Hill
2. Introducation methods of Numerical analysis S.S Sastry, Prentice Hall of India
3. Numerical Mathematical Analysis, J.B. Scarborough, Oxford
4. Numerical Solution of differential Equations by M.K. Jain, Wiley Eastern
5. Introduction to Finite Element Method, By Desai & Abel, Van Nostrand
6. Introduction to Matrix & Numerical Methods By K.I. Majid, Wood Stock
Publishing.
7. Numerical Methods By Dr. B.S. Grewal, Khanna Publisher
PTU/BOS/ME/201/27-07-2004
20
MEM 521 MODELLING AND SIMULATION
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
1. Introduction and overview, concept of system, system environment, elements of system, Monte
Carlo method, system simulation, simulation, a management laboratory, advantages limitations or
system simulation, continuous and discrete systems.
2. Technique of Simulation, Monte-Carlo method, System simulation, comparison of simulation
with analytical methods, experimental nature of simulation ,advantages, limitations and
application of system simulation.
3. Numerical computational techniques-for continuous and discrete models. Distributed lag models.
Cobwals models, examples involving numerical methods of analysis.
4. Simulation of continuous systems: characteristics of a continuous system, comparison of
numerical integration with continuous simulation system. Simulation of an integration formula.
Simulation of trajectories, pure pursuit, serial pursuit, chemical reaction and auto pilot. Analog
methods, digital-analog simulation time simulation, hybrid simulation.
5. Simulation of discrete system: Time flow mechanisms, Discrete and continuous probability
density functions. Generation of random numbers, testing of random numbers for randomness and
for auto correlation, generation of random variates for discrete distribution, generation of random
variates for continuous probability distributions-binomial, normal, exponential and beta
distributions; combination of discrete event and continuous models. The rejection method.
Simulation of reliability, queuing and inventory problems.
6. Design of Simulation experiment: Length of run, elimination of initial bias. Variance reduction
techniques, stratified sampling, antipathetic sampling, common random numbers, time series
analysis, spectral analysis, model validation, optimisation procedures, search methods, single
variable deterministic case search, single variable non-deterministic case search, regenerative
technique.
7. Simulation Languages: Continuous and discrete simulation languages, block structured
continuous languages, special purpose simulation languages, SIMSCRIPT, GESS SIMULA
importance and limitations of special purpose languages.
PRACTICALS:
Students will be required to develop design and execute computer simulation experiments to analyse
complex real life industrial situations.
Books Recommended
Simulation and Modelling Loffick Tara Mcgraw Hill
System Simulation with Digital Computer Deo Narsingh Prantice Hall
System Simulation Hira, D.S. S. Chand & Co.
Computer Simulation and Modelling Meeiamkavil John Willey
System Simulation Gerden Printice Hall
PTU/BOS/ME/201/27-07-2004
21
MEM 522 COMPOSITE MATERIALS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to
be set. The candidates will be required to attempt any five questions.
1. Introductions to Composites; History and categorization of composite into
particle- and- fiber- reinforced systems, Fibers, Matrix, Reinforcement/matrix
interface, polymer matrix composites, Aramid Aluminium Laminates, Metal
Matrix Composites, Ceramic Matrix Composites, Carbon-Carbon Composites,
Cement Matrix Composites, Applications of fiber reinforced structural
composites.
2. Nature of fiber reinforcement (glass, carbon, Kevlar and whiskers), Fabrics,
Fillers, Matrix materials ( thermosets, thermoplastics and metal alloys ) and
Fiber/Matrix Adhesion.
3. Comparison of mechanical properties with other engineering materials.
Structures and processing for laminated structures, Press Moulding Processes,
Filament Winding, the Pultrusion process for continuous Automated
Manufacture of Engineered Composite Profiles and Processing thermoplastic
matrix composites.
4. Micro mechanics of fiber and particle reinforced composites. Prediction of
elastic components. Strength of Composites parallel and perpendicular to
fibers, Krenchel Coefficients. Load transfer in composites, interfacial shear,
critical fiber lengths, critical aspect ratio. Inter- laminar shear strength.
5. Fracture and Damage Mechanics in Laminated Composites; Damage
classification and failure mechanisms, Free edge delamination, stiffness loss
in laminae due to damage. Toughness of composites, Cook- Gordon effect,
fracture energy of cross-laminated composites. Fatigue and creep of
composites, S-N Curves, residual strength.
6. Environmental Effects and Non Destructive Testing ( NDT ) of composites,
High Strength, High temperature composite materials. Design Methodology
and Practices in Composite Materials Design.
Books Recommended :
1. Modern Composite Materials, L.J. Broutman and R.M.Krock, Addison-
Wesley.
2. Composite Materials- Science & Engineering, K. K. Chawla, Springer-
Verlag, New York.
3. Mechanisms and Mechanics of Composite Fracture, R. B. Bhagat, S.G.
Fishman,R.J. Arsenault, ASM Intrenationals,1993.
PTU/BOS/ME/201/27-07-2004
22
MEM 523 ENGINEERING FRACTURE MECHANICS
Note: In all eight questions, covering the whole syllabus evenly, each of 20 marks, are to be set.
The candidates will be required to attempt any five questions
Introduction Historical Review, The Significance of Fracture Mechanics, The Griffith
Energy Balance Approach , Irwin’s Modification to the Griffith Theory , The Stress
Intensity Approach , Crack Tip Plasticity, Fracture Toughness, Elastic-Plastic Fracture
Mechanics, Subcritical Crack Growth, Influence of Material Behaviour Part II Linear
Elastic Fracture Mechanics The Elastic Stress Field Approach Introduction,
Derivation of the Mode I Elastic Stress Field Equations, Useful Expressions, Finite
Specimen Width, Two Additional Important Solutions for Practical Use, Superposition of
Stress Intensity Factors, Some Remarks Concerning Stress Intensity Factor
Determinations
Crack Tip Plasticity Introduction, The Plastic Zone Size According to Irwin, The Plastic
Zone Size According to Dugdale: The Strip Yield Model, First Order Approximations of
Plastic Zone Shapes, The State of Stress in the Crack Tip Region, Stress State Influences
on Fracture Behaviour
The Energy Balance Approach Introduction, The Energy Balance Approach, Relations
for Practical Use, Determination of Stress Intensity Factors from Compliance, The
Energy Balance for More Ductile Materials, Slow Stable Crack Growth and the R-Curve
Concept
Elastic-Plastic Fracture Mechanics, Basic Aspects of Elastic-Plastic Fracture
Mechanics, Introduction, Development of Elastic-Plastic Fracture Mechanics. The J
Integral, Remarks Concerning the J Integral Concept, J as a Stress Intensity Parameter,
The Crack Opening Displacement (COD) Approach, Remarks on the COD Approach,
Relation Between J and CTOD
Fracture Mechanics Concepts for Crack Growth, Fatigue Crack Growth, Introduction,
Description of Fatigue Crack Growth Using the Stress Intensity Factor, The Effects of
Stress Ratio and Crack Tip Plasticity: Crack Closure, Environmental Effects, Prediction
of Fatigue Crack Growth Under Constant Amplitude Loading,
Sustained Load Fracture Introduction, Time-To-Failure (TTF) Tests, Crack Growth
Rate Testing, Experimental Problems, Method of Predicting Failure of a Structural
Component, Practical Significance of Sustained Load Fracture Testing
Books Recommended
1. Fracture Mechanics, M. Jansen, J Zuidema, K J H Wanhill, Delft Univ Press
2. Fatigue of Metals, Subra Suresh, Cambridge Univ Press
3. Fracture Mechanics, Fundamentals and Applications, Anderson, CRS Press
4. Analytical Fracture Mechanics, David J Unger, Dover Publications
5. Fatigue of Metals, Pope